Flexible packaging prepress design considerations
Curing agent of hose packaging prepress design process has many remarkable detail, here with all of you focus on small text and line design considerations. ( 1) Small text and line to design into a single package, avoid the polychromatic misregister. The width of the fine lines cannot be lower than 0. 1 mm, otherwise easy to lose in the printing or stroke is not clear. The net height of Chinese fonts is not less than 1. The net height of 8 mm, English font is not less than 1. 5mm。 ( 2) The white text should pay special attention to when designing, if the word is small, especially stroke is fine, to use single color. Should also pay attention to the choice of font, round head, black body, such as line body is a better choice, the song typeface, song typeface ( Thin horizontal and thick vertical) Such as strokes are too different font will be careful, if use this font, when the design should pay attention to the Chinese fonts the net height of not less than 2. 5 mm, net of English font height not less than 2 mm. The reason: 1) After compared with the first printing ink printing ink viscosity is too high. ( 2) First printing ink fixation is slow and large amount of ink. ( 3) Four color ink color intensity balance is not appropriate. Processing method: 1) Using high viscosity ink printing first, after the low viscosity of ink printing, ideal viscosity requirements should be according to gradually reduce the overprint color order. ( 2) Using sessile fast ink printing, and print too thin some high concentration, pattern area is small jump, eli behind overprint. ( 3) Any of a set of wet multi-color overprint ink their color intensity is balanced, can use equivalent to the ink overprint, if the use is not the same set of ink printing together, when used will be disposed of properly.
Guangzhou LISSON is a professional tube manufacturer specializing in the development, production and sale of tube
Innovation is the spirit. We have been pursuing the raise of the user experience, Lisson offfers cosmetic tube with applicator which has massage funtion, it can lift and whiten skin tone and keep skin clean, welcome to reach us for details.
How do small and medium-sized enterprises develop product of cosmetics.
1. Don’t make too many products. There are more and more small and medium-sized cosmetic manufacturers. Their products almost cover all kinds of cosmetics. You can see that there are many products, but in fact, they have many disadvantages. The first one is that the sales volume is not necessarily high. The 80/20 law states that 80% of the benefits of any entity come from 20% of the products, that is, 80% of the products can only contribute 20% of the benefits, which is not economic. The second one is that too many product lines are relatively backward in management, and their own strength is insufficient, enterprises can’t grasp the dynamics of consumers' hearts, so there are a lot of products which are not need by consumers. Third, most companies focus on speculation and bargain hunting. Too many product lines limit the development of an enterprise. It is difficult for consumers to form an understanding of the enterprise without a major product. And it is impossible to find the market position without the c
What standard should cosmetic tube have in respect of oxygen resistance
Cosmetic tube as a container of cosmetics, do not react with the products is the most important function of tube, cosmetic ingredients are easy to cause the reproduction and growth of bacteria, in addition to its own factors, there is a part of the influencing factors because of the impact of oxygen and water; It can be seen that, the most important factor of cosmetic deterioration is oxygen, all cosmetic tube needs to have very good oxygen resistance and gas resistance (prevent the fragrance molecules in the cosmetics and the effective molecules of cosmetics overflow).