Haikou is recycled pet plastic 6, glass bottles, such as belong to the manual mold production, capacity will appear a little deviation, in use should be done and do the right capacity, such as automatic production line is relatively uniform, but shipments require larger, cycle is relatively long, more capacity.
Five, the color printing class 3, injection pressure.
Good PET melt flow, easy molding, usually USES the medium pressure, the pressure is 80 ~ 140 mpa, glass fiber reinforced PET injection pressure is 90 ~ 150 mpa.
Should consider the determination of injection pressure, viscosity of PET, the amount and type of packing, the location and size of gate, the shape of the plastic parts, mold temperature, injection molding machine type and size, etc.
If can of words, cannot be called the red line.
Cheng Lifeng said, ecological protection line has a very strict, the red line is to implement ecological protection 'only, cannot' requirements.
'Only, can't', this also give place to a strong, ecological protection defined in the red line, can not blindly pursuing big, shoddy, nor like the past to develop the quick buck, the lack of long-term planning.
Surplus peaks, executive vice President toysun said that controlling shareholders (
'Surplus peak holdings')
Other three agencies jointly invested 11. 6 billion yuan to buy the zoomlion plate, a 80% stake.
Among them, the peak classy holding as acquisition of initiator, 51% controlling stake in 7. 4 billion yuan.
In addition, surplus peak ring, big data layout;
, companies such as layout in cities and towns, rural sewage disposal and ecological restoration.
Six classes in production regulation applicable cases, cases and focused on the 'other circumstances stipulated by the laws and regulations'.
The so-called 'other', in an eia, built before batch, excessive blowdown, anti-pollution measures, such as the sewage behavior mainly.
'That the number of other types of cases are relatively high, should be further defined him, to give people a better method to guide.
At the same time, to eliminate, stopped and delayed coal production capacity of 50 million kw or more, to dissolve the coal excess capacity to prevent risks and efficiency of coal industry, make room for clean energy development.
Should strictly carry out environmental protection, and energy consumption, and other relevant laws and regulations and, by means of marketization under the rule of law, more effective treatment of 'zombie' companies, promote the enterprise merger and reorganization, liquidation, resolutely eliminate substandard backward production capacity, strict controls of excess industry on the new capacity.
Large capacity to use glass, because the store for a long time, suitable for small capacity of PP short-term storage.
Most no perfume PCTA and PETG.
3, in the design to consider up to not more than two colors, the film to the Yin, text, pattern, line is not carefully or is too large, easy to cause broken lines or JiMo phenomenon, should be proofing confirmed before mass production, to avoid color differences.
Do not use the long residence time, in order to prevent the molecular weight decreased.
As far as possible avoid temperature above 300 ℃.
If the downtime is less than 15 minutes.
Just make air-launched processing;
If more than 15 minutes, then use PE clean, viscosity and the barrel temperature drop to PE, until it is.
Building energy efficiency prospect analysis of energy consumption per unit building 2 - higher than the same climate conditions
Three times.
On the basis of calculation and building energy saving energy saving space (
With reference to the current advanced level)
341 billion kWh/year, of hours according to average 4500 hours of power generation, emission reduction effect is equal to peak in power generation capacity, or new clothes.
700 million kW wind power, or 310 GWP pv installed.
As a professional engaged in the work of the PPP law, wanshang day frequently law firm urban infrastructure (
PPP)
Legal service team to host ZhuYi nameplates, say, the PPP itself is relatively new and more complex, not only need sufficient argumentation, side also need detailed investigation and social capital.
Therefore, the project by the recognition stage entered the stage of execution over a period of time.
Clear key, the key monitoring soil cadmium, arsenic, lead, chromium and other heavy metals and polycyclic aromatic hydrocarbons, petroleum hydrocarbons and other organic pollutants, focus on selecting nonferrous metallic deposits, nonferrous metal smelting, oil exploitation, oil processing, chemical industry, coking, electroplating, tanning, etc, and grain production,
Oil)
Large area county, ground level above the city proper, etc.
In recent years, under the policy and market to promote environmental protection industry development momentum.
Industry experts believe that in the face of the rapid expansion of the industry, innovation and development is the foundation of technology and industry competition, only by constantly encourage enterprises to speed up the application of new results, new, to inject inexhaustible driving force for industrial development.
'Under the dual policy and market to promote, 'much starker choices-and graver consequences-in' environmental protection industry got off to a good start.
Good natural also can promote people to form and maintain a good mood, are beneficial to the health of body and mind.
Second, the enterprise protection work and actively promote, help enterprise technology innovation and development.
To strictly abide by the law laws and regulations, pollutant discharge limits, companies will actively develop new production and processing technology, innovation, protection, promptly eliminate backward production and processing equipment, development and technological progress and innovation.
D, PETG (
Environmental protection material)
Flocking high frequency and the thickness of 0.
2mm—
0.
8 mm 1, production plate, sheet, advantages and disadvantages in the process of the bottle shape determines the quality of difficulty and the performance of the bottle blow molding process.
Normal bottle shape for spindle, abnormal are fluid, handle, etc.
The causes of abnormal shape are local heating is undeserved, blowing blowing pressure or flow is insufficient, etc, in particular the size of the bottle blowing depends on wind pressure and blow position.
To maintain the equipment in the production of all bottle size and shape is consistent, if there are differences to find the specific reason, according to preliminary bottle blowing heating or blowing process.
Español 
