Plastic hose considerations and treatment methods in the process of packaging and printing

Matters needing attention in the process of plastic hose packaging printing and processing method in the process of plastic hose packaging prepress design, there are many worthy of attention to details. Here we will focus on the fine print, string cable design considerations. ( 1) Use a small text and line is designed as a packaging, should pay attention to avoid the multi-color overprint. The width of the thin line should not be less than zero. 1 mm, otherwise easy to lose or not clear when printed. Chinese font clear height of not less than 1. 8 mm, English word clear height of not less than 1. 5 mm. ( 2) Special attention should be paid to prevent white design. If the word is small, especially stroke is very fine, should use monochrome. Also note that the choice of font, such as round head, bold, etc. , is a better choice, the song typeface, font difference is too big, should be careful to use. If use this font design, the net height of Chinese font should not be less than 2. The net height of 5 mm, English font should not be less than 2 mm. The reason: 1) After compared with the first printing ink, printing ink viscosity is too high at a time. ( 2) ChuYin ink fixed the slow and large amount of ink. ( 3) Four color ink color balance not appropriate. Processing method: 1) With high viscosity ink printing first, reoccupy low viscosity ink printing, ideal viscosity requirements according to superimpose color is lower in the order. ( 2) Using fixed quick printing ink and thinner in high-density printing, design area under the condition of small printing first, on the back for easy dieyin. ( 3) Any more than a set of wet color ink dieyin, their color intensity is balanced, can use the same amount of ink dieyin, if not the same set of ink printing, use the appropriate processing.