The filling process in general working principle of plastic hose

Working principle of the filling process of plastic hose general plastic hose filling process the general working principle: by automatically send tube device, ordered to fill hose from the large capacity hose silo, in turn after the whole column automatically inserted into the positioning mould. Positioning module along with the wheel rotation, stay in different positions, respectively. Will need to fill the paste into the sealed tapered cylinder. Through the plunger and barrel direct connection quantitative filling valve, which can realize accurate paste, automatic filling. Intermittently stays on the filling station, the market continued to rotate. Quickly filling material of hose body was taken to a different tail seal position, manipulator for each station immediately to seal the tail pipe. By adjusting the volume control table, may obtain the different filling capacity. By changing different manipulator, can complete aluminum pipe and other metal of twenty percent, thirty percent, saddle different folding forms such as folding, and can complete all heat sealing of plastic pipe and pipe work. Sealing robots will automatically after the production date and batch number printed at the end of the pipe. Note: in the whole process of filling and sealing, filling and sealing are two need to pay attention to the position, because if the filling and sealing improper operation, will directly lead to the leaking of products. Filling, the material should not be polluted hose walls; Tail seal, pressure and temperature on the correct selection of equipment parameters, and combining the hose material processing window, explore and set up for the best. Otherwise, the surface of the hose will appear white, wrinkled, fake seal leakage phenomenon. If there is a replacement hose manufacturer, attention should be paid to produce the diameter of the hose and tolerance, adjust matching hot stamping head and the size of the cooling ring, in order to achieve the best sealing effect.