Español 
How to effectively do branding of wholesale cosmetic tubes
Precautions and treatment methods before printing on plastic hose packaging lines and fonts
by：Lisson
2021-03-09
Precautions and treatment methods before printing on plastic hose packaging lines and fonts
There are many noteworthy details in the pre-compression design of plastic hose packaging. Here we will discuss the precautions for small text and line design. Small fonts and lines should be designed on a separate package to avoid multi-color overprinting. The width of the thin line should not be less than .mm, otherwise it is easy to lose during the printing process. The net height of Chinese fonts is not less than .mm, and the net height of English fonts is not less than .mm. Pay special attention to the design of the inverted text. If the text is very small, especially the strokes are very thin, you should use monochrome. You should also pay attention to the choice of fonts. Round-headed font, bold font, and symmetrical spiral font are better choices. Fonts with too wide strokes such as Song Ti and Old Song Ti should be used with caution. When designing such fonts, attention should be paid to the characteristics of Chinese fonts. The net height is not less than .mm, and the net height of English fonts is not less than mm. The reason is mainly due to one aspect. Compared with the first printing ink, the ink viscosity is too high. .The ink fixation is slow and the ink volume is large. . The unbalanced color intensity of the four-color ink is inappropriate. Processing method. High-viscosity ink is used for printing first. After printing, low-viscosity ink should reduce the ideal viscosity according to the order of overprinting. .Using fast printing ink, and the printing density is high, some are thinner when printing, and the design area is small for the initial printing, which is conducive to overprinting. .Any set of damp multi-color overprinting ink has a balanced color intensity. Overprinting can use the same amount of ink. If it is not the same set of ink printing, use appropriate treatment.
There are many noteworthy details in the pre-compression design of plastic hose packaging. Here we will discuss the precautions for small text and line design. Small fonts and lines should be designed on a separate package to avoid multi-color overprinting. The width of the thin line should not be less than .mm, otherwise it is easy to lose during the printing process. The net height of Chinese fonts is not less than .mm, and the net height of English fonts is not less than .mm. Pay special attention to the design of the inverted text. If the text is very small, especially the strokes are very thin, you should use monochrome. You should also pay attention to the choice of fonts. Round-headed font, bold font, and symmetrical spiral font are better choices. Fonts with too wide strokes such as Song Ti and Old Song Ti should be used with caution. When designing such fonts, attention should be paid to the characteristics of Chinese fonts. The net height is not less than .mm, and the net height of English fonts is not less than mm. The reason is mainly due to one aspect. Compared with the first printing ink, the ink viscosity is too high. .The ink fixation is slow and the ink volume is large. . The unbalanced color intensity of the four-color ink is inappropriate. Processing method. High-viscosity ink is used for printing first. After printing, low-viscosity ink should reduce the ideal viscosity according to the order of overprinting. .Using fast printing ink, and the printing density is high, some are thinner when printing, and the design area is small for the initial printing, which is conducive to overprinting. .Any set of damp multi-color overprinting ink has a balanced color intensity. Overprinting can use the same amount of ink. If it is not the same set of ink printing, use appropriate treatment.
Custom message
Related Products
