Plastic hose packaging lines and print before considerations and treatment methods

Plastic hose packaging lines and print before considerations and treatment methods in plastic hose package of preloading design there are many worthy of attention to details. Here we will discuss the matters needing attention of small text and line design. Small font and line should be designed in a separate package, to avoid the multi-color overprint. Thin line width should not be less than zero. 1 mm, otherwise easy to lose in the printing process. Chinese font clear height of not less than 1. 8 mm, English font clear height of not less than 1. 5mm。 Special attention should be paid to reverse design of the word, if the word is very small, especially the stroke is very fine, should use monochrome. Should also pay attention to the choice of font, round head body, blackbody and isospin line body is a good choice, but the song typeface, song typeface such as stroke width font should be used carefully, in the design of this type of font, Chinese fonts should be paid attention to the clear height of not less than 2. 5 mm, English font clear height of not less than 2 mm. The reason mainly has three aspects: 1. Compared with the first printing ink, ink viscosity is too high. 2. Ink color fixation slow, large amount of ink. 3. Four color ink color intensity imbalance is inappropriate. Methods: 1. High viscosity is first used in printing ink, ink low viscosity after printing, ideal viscosity requirements should press overprint color sequence. 2. High concentration using fast printing inks, and printing, printing some thin, ChuYin design area is small, is conducive to overprint. 3. Any of a set of wet multi-color overprint ink color intensity is balanced, the same amount of ink overprint can use, if not the same set of ink printing, use the appropriate processing.