Español 
How to incorporate metallics in your aluminum collapsible tube
Pre-press design considerations for cosmetic tube packaging
by：Lisson
2021-03-09
Pre-press design considerations for cosmetic tube packaging
Cosmetic tube packaging pre-press design considerations There are many noteworthy details in the pre-press design process of cosmetic tube packaging. Plastic hose manufacturers are here to discuss the small text and line design considerations. () Small text and lines should be designed as a single package to avoid inaccurate multi-color overprinting. The width of the thin line cannot be less than .mm, otherwise it is easy to be lost in printing or the strokes are not clear. The net height of Chinese fonts is not less than .mm, and the net height of English fonts is not less than .mm. () should pay special attention to the design of the reversed text. If the text is small, especially when the strokes are thin, use a single color. Also pay attention to the choice of fonts. Round-headed, bold, and equal-line fonts are the better choices, while fonts that have too much difference in strokes, such as Times New Roman, Old Times New Roman (horizontal thin and vertical thick), should be used with caution. Hardener hose If this type of font is used in the design, it should be noted that the net height of Chinese fonts is not less than .mm, and that of English fonts is not less than mm. Cause () The viscosity of the ink printed later is too high compared to the ink printed first. () The ink that was printed first has a slow fixation and a large amount of ink. () The color intensity balance of the four-color ink is inappropriate. Processing method () Use high-viscosity ink to print first, and low-viscosity ink to print later. The ideal viscosity requirement for cosmetic plastic hoses should be gradually reduced in the order of overprinting colors. () is printed with a fast-fixing ink, and the density is high and the printing is thinner, and the pattern area is small and printed first to facilitate subsequent overprinting. () The color intensity of any set of wet multi-color overprinting inks is balanced, and the same amount of ink can be used for overprinting. If the same set of inks are not used for printing together, they must be handled properly when used. Cosmetics Packaging Material Factory is an enterprise specializing in the research and production of cosmetic hoses, which are mainly used for cosmetic packaging, food packaging, pharmaceutical packaging, hotel supplies packaging, personal care product packaging, etc. Committed to providing customers with high-quality cosmetic hoses and packaging solutions.
Cosmetic tube packaging pre-press design considerations There are many noteworthy details in the pre-press design process of cosmetic tube packaging. Plastic hose manufacturers are here to discuss the small text and line design considerations. () Small text and lines should be designed as a single package to avoid inaccurate multi-color overprinting. The width of the thin line cannot be less than .mm, otherwise it is easy to be lost in printing or the strokes are not clear. The net height of Chinese fonts is not less than .mm, and the net height of English fonts is not less than .mm. () should pay special attention to the design of the reversed text. If the text is small, especially when the strokes are thin, use a single color. Also pay attention to the choice of fonts. Round-headed, bold, and equal-line fonts are the better choices, while fonts that have too much difference in strokes, such as Times New Roman, Old Times New Roman (horizontal thin and vertical thick), should be used with caution. Hardener hose If this type of font is used in the design, it should be noted that the net height of Chinese fonts is not less than .mm, and that of English fonts is not less than mm. Cause () The viscosity of the ink printed later is too high compared to the ink printed first. () The ink that was printed first has a slow fixation and a large amount of ink. () The color intensity balance of the four-color ink is inappropriate. Processing method () Use high-viscosity ink to print first, and low-viscosity ink to print later. The ideal viscosity requirement for cosmetic plastic hoses should be gradually reduced in the order of overprinting colors. () is printed with a fast-fixing ink, and the density is high and the printing is thinner, and the pattern area is small and printed first to facilitate subsequent overprinting. () The color intensity of any set of wet multi-color overprinting inks is balanced, and the same amount of ink can be used for overprinting. If the same set of inks are not used for printing together, they must be handled properly when used. Cosmetics Packaging Material Factory is an enterprise specializing in the research and production of cosmetic hoses, which are mainly used for cosmetic packaging, food packaging, pharmaceutical packaging, hotel supplies packaging, personal care product packaging, etc. Committed to providing customers with high-quality cosmetic hoses and packaging solutions.
Custom message
Related Products
