Home  >  NEWS  >  Tips On How To Avoid Getting Aluminum Tubes With A Bad Surface Finish

Tips On How To Avoid Getting Aluminum Tubes With A Bad Surface Finish


Aluminum is a popular material for manufacturing metal cosmetic tubes. It's lightweight and strong, but it can also be problematic if not finished properly. We hope that with this article, you can avoid making a grievous mistake. It will give you all the information you need on how to avoid getting a bad surface finish on your aluminum tubes. 

The length of the metal cosmetic tube:

The length of the cosmetic squeeze tubes is important. If you want to avoid getting aluminum tubes with a bad surface finish, make sure that your tubes are as short as possible. The longer they are, the more expensive they will be and also more likely to have a bad surface finish due to the extra time required for their production. If you need to buy a large number of small tubes, it’s best to get them from a single cosmetic tube supplier or distributor. 

This will help ensure that they all match in size and it also reduces the chance of getting aluminum tubes with a bad surface finish. If you’re buying your tubes from a supplier, be sure to ask them about their tube lengths. If they don’t have any in stock that are short enough for your project, try another supplier or wait until some become available.

Type of aluminum:

Aluminum alloys are used in a variety of applications. The type of aluminum alloy that is used depends on the application and cost. There are several different types of aluminum alloys, each with certain properties that make it ideal for specific applications.

For example, spring steel is an excellent material for springs because it's strong but also easy to manufacture for cosmetic tube factories and has low weight compared to other materials. Aluminum alloys are  lightweight yet resistant to corrosion; this makes them more efficient than plastic composites when trying to keep costs down while still maintaining durability levels necessary for long-term use!

Inner diameter (ID) and outer diameter (OD) of the metal tube:

ID and OD are the two most important factors in selecting the right cosmetic squeeze tubes. The ID is the diameter of your inner tubing, while OD is its outer diameter. Both must match for you to be able to install your product properly. If you want to avoid getting aluminum tubes with a bad surface finish, then make sure that both these numbers are within acceptable ranges before ordering!


Costs for wholesale aluminum squeeze tubes are usually a big factor when you're buying anything and that's true with aluminum products as well. But there are other things you should consider when deciding on what kind of aluminum squeeze tubing is right for your application.

The cost of metal cosmetic tubes is not the deciding factor when choosing a cosmetic tube. A bad surface finish could be cheaper, but it will be more expensive in the long run.

Tubing geometry:

Having a bad surface finish on your tubing can be caused by the geometry of the cosmetic squeeze tubes. If you have a good cosmetic tube supplier, this will not be an issue for you. However, if your manufacturer has substandard built qualities and it becomes damaged during production or storage in some way (such as being dropped), then this could result in extruded tubes with poor surfaces.

To tell if your cosmetic tubes have been affected by this problem, look at them under magnification tools. If they’re not smooth all over their length then there might be something wrong with them!

If indeed the good enough quality materials are being used then there should be no need to worry about using them. But if not, then it may be worth taking extra precautions and spending a few more bucks to make sure the surface finish is on point.

Final tips:

The following tips will help you avoid getting aluminum squeeze tubes with a bad surface finish:

●Check your tubes for scratches, dents and other defects.

●Use high-quality aluminum tubes that meet FDA specifications for strength and thickness.

●Know your requirements before you start.

●Don't get caught up in the hype.

●Be realistic about what you need and don’t be afraid to ask questions, especially if you're on a tight budget or don't know much about aluminum cosmetic tubing.

Chat Online
Chat Online
Leave Your Message inputting...
Dear friend, thank you for your message. Could you please offer us your email? We will answer your questions as soon as possible. Thank you! ^_^