Blow molding cosmetic soft hose cosmetics packaging production mold maintenance

Blow molding, transparent container should be highly polished blow molding cosmetics cosmetics packaging hose production mould cavity, the production process every once in a while to polish again. Polishes with soft tissue paper is used to polishing cavity, polishing the force to make a small amount of polish infiltration within the cavity surface, and then use clean cotton paper to polishing, until the cavity in a mirror. When polishing often want to change the cotton paper, in order to avoid scratch cavity.
blow molding cosmetics cosmetics packaging hose production mold clamp embryos mouth after the blade wear must be familiar with molding workers to repair.
blow molding cosmetics cosmetics packaging hose production mold neck shear block and intake cut set is the key part of the rod, keep good condition, if necessary, replacement, such as shear block edge is uneven wear, the forming of container when use the neck leak happens.
blow molding cosmetics cosmetics packaging hose production mold cooling channel due to congestion or corrosion and affects the flow of cooling medium, should immediately clean up.
blow molding cosmetics cosmetics packaging hose production mold guide pillar and guide bush should be lubricated regularly, every work to replace at least once a year, to ensure that the two cosmetic soft hose cosmetics packaging production mold alignment, improve cosmetics cosmetics packaging hose production die life.
when to stop production or blow molding cosmetics cosmetics packaging hose production mold to inventory, want to use compressed air to blow away makeup cosmetics packaging hose production mold cooling channel, cavity should be coated with protective agent, in order to avoid corrosion.