【 Lipstick cosmetics packaging hose manufacturer 】 Talk: injection cosmetics cosmetics packaging hose production mold profile and its characteristics

Everyone knows that a lot of plastic products processing and production, is inseparable from the injection cosmetics cosmetics packaging hose production mold. We suye cosmetics packaging hose, as a professional lipstick gel cosmetics packaging hose manufacturer, of course, is no exception. Below small make up to introduce single injection cosmetics cosmetics packaging hose production mold and its characteristic, the content is as follows:
injection cosmetics cosmetics packaging hose production mold profile

injection cosmetics cosmetics packaging hose production mold is a kind of plastic products production tools; Is to increase the complete structure of plastic products and precise size of the tool. Injection molding is a mass production of some complex shape parts used when a processing method. Specific means that a heated melting plastic by injection molding machine high pressure into the mold cavity, after cooling solidification, molded products. 【 SMC cosmetics cosmetics packaging hose production mold 】
injection cosmetics cosmetics packaging hose production moulds according to the forming characteristics is divided into thermosetting plastic cosmetic soft cosmetics packaging hose production mould, thermoplastic plastic soft cosmetics packaging hose production mold two; According to the molding process is divided into the mold, blowing mold, casting mold, thermoforming mould, extrusion die ( Mold) , injection mould, etc. , the thermal model can be divided into the overflow type material overflow way, half overflow type, not overflow type three, injection mould was pouring system can be divided into two cold runner mold, hot runner mould; According to the loading and unloading way can be divided into two kinds of, portable and stationary.
cosmetics cosmetics packaging hose production mold though because of the plastic varieties of structure and properties, the shape and structure of the plastic products and the type of injection machine and so on different and may go, but the basic structure is the same. Cosmetics cosmetics packaging hose production mold is mainly composed of gating system, air-conditioning system, molding parts and structural parts. The pouring system and is part of the direct contact with plastic molding parts, and with the plastic and products, is the most complicated in the mold, the biggest change, request processing smoothness and accuracy of the highest part.

injection cosmetics cosmetics packaging hose production mold consists of two parts, dynamic model and fixed model, dynamic model is installed on the movement of the injection molding machine templates, fixed die is installed on the injection moulding machine fixed template. Dynamic model in injection molding and mold closing a gating system and the cavity, cavity when moving die and die separation in order to take out the plastic products. In order to reduce the heavy cosmetics cosmetics packaging hose production mold design and manufacture of workload, mostly adopted standard mould base of injection moulds.
as the main tool of injection molding processing of soft plastic cosmetics cosmetics packaging hose production mold, the quality, accuracy, manufacturing cycle and injection molding production efficiency in the process of the level of high and low, directly affect the quality of injection molding products, production, costs, and upgrading of products. So the injection mold plastic products production plays a vital role.
the characteristics of injection cosmetics cosmetics packaging hose production mold
1. Design is difficult: plastic polymer materials, its melt are sticky projectile, melt flow process change with shear stress, shear rate, and the flow process of macromolecular orientation along the flow direction. It is part of the compression after full of cavity, and in the process of cooling solidification of plastic shrinkage is very complex, each part of the mold cavity and the shrinkage rate of different directions are different, and different kinds and grades of resin shrinkage rate also have very big difference, in the design of plastic injection cosmetics cosmetics packaging hose production mould should fully pay attention.
　　2. High manufacturing costs: injection cosmetics cosmetics packaging hose production mold is aimed at a specific design of the shape of the plastic products, specifications, so all kinds of cosmetics cosmetics packaging hose production mold structure difference is very big, it can't buy at random, in the market, it is impossible to mass production.
　　3. Short production cycle, the current products in the fierce competition and as a result, each manufacturer in a race against time and do our best for the product to the market as soon as possible, this will require injection cosmetics cosmetics packaging hose production mold from design, manufacturing production to try to shorten the time.

　　4. High technical content, the shape of the injection parts molding some are complex, and is also high to the requirement of size, precision, and a main structural component is more, it gives injection cosmetic soft hose cosmetics packaging production mold design and manufacturing has brought a lot of difficulty, in order to be on time and qualified the cosmetics cosmetics packaging hose production mold manufacture, must be a good soldier character, must focus on the advanced technology of mechanical manufacturing.
summary: above is suye cosmetics manufacturer of lipstick packaging hose technology consultant for your summary about the cosmetics cosmetics packaging hose production mold profile and its characteristics, the entire contents of the, hope to help related lines of friends. Such as still need to know something about gel cosmetics packaging hose, vermicelli cosmetics packaging hose, cosmetics bottles, etc consulting friends please collect on this site. 【 。 】