Energy saving analysis PET cosmetics packaging production process

Krones as PET cosmetics packaging production of a full range of solutions, one of the industry leader for PET cosmetics packaging production and processing of different links of energy-saving control have a profound experience. In heating energy saving in tensile plastic process, first of all, the best interval must be time to replace the lamp; Second, the need to check the lamp and the distance of the parison, thereby heating energy costs can be reduced. Research has shown that old lamps ( After using about 11000 hours) Cost as much as 30% more than the new lamp energy, therefore, regular inspection and timely replacement of the lamp is wise. The second element of cost savings is the distance between lamp and the parison. In the case of the Krones new proposed lamp, the lamp is pressed against the parison. This new standard plasticizing furnace, causes in the process of heating to reduce nearly 10% of the energy consumption. Minimize plastic process cost consumption in the process of plastic, reduce the corner space volume also can reduce the cost of related. According to processing engineering, the 500 ml to 250 ml container valve area and the plastic nozzle shrinkage does not produce any defect, for flow cross sectional area is still the same. This area of the narrow is a standard feature of Contiform machinery, but also for already installed plastic tensile equipment can also be updated. Will have to be compressed gas volume shrinking, gas cost can save more than 7% ( At 500 ml container can be as high as 25%) That depends on the size of the container. Air reused in another plastic significantly reduce the cost of doing this is to use Air Wizard to recycled Air, which includes three or four phase. If the final plastic air used for expansion in advance again, energy costs can be reduced by about 9%. If the repeated use of not only used in the bulge in advance, also used for stretching, energy saving can reach 22%. If the repeated use of the air feed back to the operation network, the energy saving can reach 30%. If the recycled air feed back directly to the compressor, the energy cost can even reduce 40% a year.
Contiform mechanical operation of the customer, since the S series, can all be updated to reduce blind Angle space volume, significantly reduce operating cost of PET cosmetics packaging production is more and more light weight in PET cosmetics packaging production process, reduce the weight of the cosmetics packaging production child not only mean the cost of raw material is reduced, at the same time in the process of processing a variety of energy consumption can be significantly reduced. A year ago, PET Engineering company produces 10 grams of single service cosmetics packaging production. Today, the company is Brau Beviale and provides a lighter solution: a 100 ml of cosmetics packaging production only 5 g weight. The specially designed for dairy and functional drinks new container, is PET Engineering company with partners, husky injection molding technology company in Canada, the United States of Invista company and Sleever International joint design. This process makes the cost of raw materials decreased significantly, and some products need to be demand for high-performance antioxidants have been optimized. This product is a high performance of cosmetics packaging production, has the very good visual impact, and by adopting suitable liner will make it easier to implement customized production. A single dose of cosmetics packaging production relative to the Hong Kong court now similar containers, light weight around 2 g, which reduces the production cost, and reduce the container's impact on the environment. The container design is the key of the cosmetics packaging production design, conducted by Husky company and PET Engineering company, which make the minimum weight, and maintain excellent technical performance. The new single dose cosmetics packaging production design into two versions: one kind is with PET resin, another with PolyShield PET resin. Because milk beverage the excellent properties of a single dose of cosmetics packaging production and reduce the production cost, the widely used cosmetics packaging production is expected to replace the city court of HDPE cosmetics packaging production.