Cosmetics bottles cream bottle how to maintain?

At ordinary times, in our life, using cosmetic plastic material do cosmetic plastic bottle, cream bottle, cosmetic plastic vacuum flask, and so on very much, so cosmetic plastic packaging bottle packaging products can exist without health, down reading together cream cosmetics plastic bottle how to maintain? Cosmetic plastic packaging bottles we all understand that have high penetrability, low turbidity, light but strong, processing performance is good, color is rich, good electrical insulation, excellent weather resistance, can endure high temperature, strong ultraviolet light, the sun, resistance to solvents and chemicals (commonly used It is best to avoid direct sunlight and high temperature contact of cigarette butts, etc. ) Can high recovery rate; Cosmetic plastic plate disadvantage is that the shock resistance is poor, but the improved cosmetic plastic plate can meet the requirements of most cases against drawing performance. Cosmetics bottles plastic material do have the following points, hope you pay attention to: first, cosmetic plastic bottle temperature heated at 70 degrees will be out of shape, when heated to 100 degrees above will soften, so should avoid that applies to more than 100 degrees. Second, cosmetics bottles and polishing, if it is a tiny scratches, can directly use toilet paper or cloth to wipe a little toothpaste, if is big scratches, personal mind if I use sand paper to grind cosmetics bottles, if with sand paper to grind, the product is discarded, the surface is scratched all over, would be worse. And, thirdly, cosmetics bottles with soft cloth is swabbed, never use any detergent containing granular objects, do not use a variety of chemical bath agent scrub. Fourth, cosmetics bottles is easy to crack damage, take put should pay attention to the protection of the surface. Fifth, the thermal expansion coefficient of the force that press a gram, resettlement or fixed to temperature changes with scale space should be taken into consideration. 6, if the cosmetic plastic products is not damaged, can use the IPS adhesive glue/adhesive methylene chloride type of gelling agent or quick-drying agent then. Seventh, cream to cosmetic plastic bottle products bright, can use liquid polishing wax, with soft cloth to wipe.