Cosmetic bottles, caps, tubes, cans appearance

1. Cosmetics bottles (including plastic bottles and glass bottles)



(1) The cosmetics bottle body is complete, smooth, smooth, and basically uniform in thickness, without cold burst, crack, obvious scar and deformation.



(2) Cosmetics bottle mouth straight, smooth, no burr (hair mouth), thread and other coordination structure intact, straight.



(3) The cosmetics bottle is clean inside and outside.



(4) The cosmetics bottle and the cosmetics cap should be tightly coordinated without sliding teeth, looseness and leakage.



2. Cosmetic bottle cap (including outer cap, inner cap (plug, pad))



(1) inside the cover



(1) Complete, smooth, no deformation, clean, no dust, oil, etc.



(2) With the cosmetics bottle and the outer cosmetics cap match well, do not leak put.



(2) the outer cover



(1) Regular, smooth, no breakage, crack, burr (hair mouth) and burst phenomenon, uniform color, not transfer color, consistent with the standard sample.



(2) Thread and other matching structure intact.



(3) add anodized or bronzing should be uniform and complete, color and standard samples consistent.



Flip cover class outside the cover to flip flexible.



The cosmetics bottle cap and cosmetics bottle with tight, no sliding teeth, loose, leakage and other phenomena.





3, hose



(1) The pipe body is smooth, neat, uniform in thickness, without obvious scratches, and its color is consistent with that of standard samples.



(2) Seal to be firm, no openings, wrinkles and other phenomena.



(3) Bottle caps shall meet the requirements specified in 2.2.





4. Spray cans



(1) The tank body is flat, no rust spots, smooth welding seam, no obvious scratches on the main parts, uniform color, consistent with the standard sample.



(2) The winding mouth is smooth, without cracks and deformation.



(3) Bottle caps shall comply with 2.2 requirements.




Cosmetic hose packaging pre-press design considerations



.


There are many noteworthy details in the pre-press design of flexible packaging. Here we will discuss the cautions in the design of small text and lines.





(1) Small text and lines should be designed into a single package to avoid multi-color overprint. The width of the fine line should not be less than 0.1mm, otherwise it is easy to lose or lose the strokes in printing. The net height of Chinese fonts shall not be less than 1.8mm, and the net height of English fonts shall not be less than 1.5mm.

(2) Special attention should be paid to the design of anti-white text. If the text is small, especially if the strokes are thin, monochrome should be used. Font selection should also pay attention to, round head body, black body, isospin-line body is a better choice, and song style, old song style (horizontal thin vertical thick) and other strokes too wide font should be used with caution, in the design of such fonts, should pay attention to the net height of Chinese font is not less than 2.5mm, English font net height is not less than 2mm.

The reason:



(1) compared with the first printing ink after printing ink viscosity is too high.

(2) Printing ink fixation slow and large ink volume.

(3) Four - color ink color intensity balance is not appropriate.



Treatment method:



(1) High viscosity ink is used for printing first, low viscosity ink after printing, the more ideal viscosity requirements should be in accordance with the overprint color sequence to reduce.



(2) The use of fast printing ink, and the concentration of high printing some thin, small design area of the first printing, for the benefit of the overprint.



(3) Any set of wet multi-color overprinter ink their color intensity is balanced, overprinter can use the same amount of ink, if not the same set of ink printing, the use of proper treatment.