Aluminum tubes application

the application of aluminum, is everywhere in our daily life, such as building materials, vehicles, furniture, packaging materials, etc. , this is mainly because the aluminum metal has multiple advantages. For example with a single aluminum stamping and aluminum tubes, is a common packaging materials, used in cosmetics, toothpaste, hand cream filling paste frost class.


industrial added is a commonly used lubricating grease products, used in the mechanical sliding parts of lubrication, sealing and anti-wear, lubrication and sealing gasket plastic, plastic gear lubrication and sound attenuation, as well as the lubrication and sealing of all kinds of seals. The composition of the grease, is generally by refining oil thickening of compounds, inorganic thickener, additives and structure improving agent. Common grease packaging in the past, is a small plastic bag, capacity of 5 ml, but there are many products grease filling in aluminum tubes. Aluminum hose is suitable for the filling of the grease? After reading this article, you will know the answer!



first, aluminum tubes as packaging material, material is qualitative hard and not easily broken, convenience of transportation, storage, and higher levels of visual sense, rather than small plastic bags, have stronger protective.


second, aluminum tubes itself has better moisture and gas barrier property, which can effectively isolate the moisture in the air, oxygen, and so on, from products in circulation, storing contaminated or corrosion. Especially, aluminum tube filling grease, if not a finished after open, to tighten the cover can be stored for a period of time, very practical, environmental protection; Grease and general small plastic bags, after opening a finished, otherwise prone to oxidation.


third, add the internal coating of aluminum tubes, can strengthen air tightness, also avoid built-in grease react with aluminum metal. To maintain the performance of grease products, is the product packaging value when the choice! In addition, if the tail with a layer of glue, and sealing of the hose closure after so much the better!


the last and most important, pure aluminum aluminum tubes, suitable for filling with certain viscosity paste products, too thick or too thin are not suitable. General advice NLGI consistency level to 2 grease products, such as lithium base grease, the agent, silicone, preventing is the most suitable for the use of aluminum tube filling. If the product of low consistency ( Thin) , or embedded special tiny molecules, is not suitable for aluminum tubes out of the packaging material.