Español 
Latest products
Want to avoid printing equipment operation problem, these details need to bear in mind!
by：Lisson
2020-11-17
Want to avoid printing equipment operation problem, these details need to bear in mind!
Want to avoid printing equipment operation problem, these details need to bear in mind!
printing equipment safe operation of the operating procedures 1, reading a hand-over records, for will be carefully checked production list in the production of products and the various preparations, such as: paper, plate, printing ink, scraping blade, etc.
2, open the power supply, check the main operation control system, quality camera system, register system operation is normal.
3, start the fan and heater, check whether the fan is normal boot, oven temperature rise is normal, check the workings of the ink pump, winding, rolling sheet system work is normal.
4, the crew should wear protective mask, prevent the toxic gases harm to human body.
5, confirm the machine all normal, various process parameters has been meet the requirements, the crew ready all rear can boot.
6, signal first, before starting the train start, after waiting for normal speed gradually accelerated to regulations.
7, in equipment operation, carefully check the running status.
8, in addition to the captain, others may not arbitrarily change the alignment system and control system parameters.
9, in operation, to adjust the machine speed slow. Drum material joint wants firm, diligently patrol, halfway down, can not stop the compressed air supply.
10, is strictly prohibited under the unattended operation. When have dinner to arrange personnel to stay.
11, in equipment maintenance, care must be taken on all kinds of electric eye, interlock switch, etc, to prevent collision damage or move.
12, the hand-over records must fill in and sign the name. Record to seek truth from facts, shall not be a fraud. Legacy must have a log message.
13, while going off work to prepare for the machine and the surrounding clean health work. No succession to shut off the main power supply. Conversion table packaging printing knowledge
printing equipment safe operation of the operating procedures 1, reading a hand-over records, for will be carefully checked production list in the production of products and the various preparations, such as: paper, plate, printing ink, scraping blade, etc.
2, open the power supply, check the main operation control system, quality camera system, register system operation is normal.
3, start the fan and heater, check whether the fan is normal boot, oven temperature rise is normal, check the workings of the ink pump, winding, rolling sheet system work is normal.
4, the crew should wear protective mask, prevent the toxic gases harm to human body.
5, confirm the machine all normal, various process parameters has been meet the requirements, the crew ready all rear can boot.
6, signal first, before starting the train start, after waiting for normal speed gradually accelerated to regulations.
7, in equipment operation, carefully check the running status.
8, in addition to the captain, others may not arbitrarily change the alignment system and control system parameters.
9, in operation, to adjust the machine speed slow. Drum material joint wants firm, diligently patrol, halfway down, can not stop the compressed air supply.
10, is strictly prohibited under the unattended operation. When have dinner to arrange personnel to stay.
11, in equipment maintenance, care must be taken on all kinds of electric eye, interlock switch, etc, to prevent collision damage or move.
12, the hand-over records must fill in and sign the name. Record to seek truth from facts, shall not be a fraud. Legacy must have a log message.
13, while going off work to prepare for the machine and the surrounding clean health work. No succession to shut off the main power supply. Conversion table packaging printing knowledge
Custom message
