Organic glass screen printing ink deployment points parsing

Have you ever remove the ink can proceed directly to printing ink behavior? Have you ever had and wiped the move accumulation on the silk screen printing ink? Do you have on the scraping blade to experience inappropriate pressure? If you give the answer to these three questions is yes, then you can make the three big taboo in the organic glass screen printing process. If you can spend a little on the deployment of ink, using repeatable taut wire mesh at the same time, the control of the scraping blade Angle and speed, organic glass screen printing can be easily avoided most of the problems in the process. Every problem mentioned above will directly affect the quality of the organic glass screen printing craft, the production efficiency and printing enterprise credibility. These three questions will be discussed in detail. Almost all the increase plastisol ink factory are concentrate, manufacturer, colors and types, the degree of enrichment is different also, some even super concentrated. Here we will focus on discuss raising plastisol ink, because most of the textile printing using this kind of ink. Simply speaking, the ink is composed of three main components: PVC ( Polyvinyl chloride (PVC) plastic) , paint ( Colour) And plasticizer ( Or other additives) 。 PVCPVC is a kind of adhesive, hot melt after make solid paint adhesion on the surface of textile materials. It is a kind of very fine particles dispersion resins, a bit like sugar. When it mixes with plasticizers or other types of additives ( In addition to the paint) , to colorless transparent liquid substances, after coating can form a thin a thin film.