Introduction to the DBL glass screen printing ink

Product synopsis: DBL series is a kind of high gloss, low odor one-component screen printing ink, with good acid and alkali resistance. Applicable materials: glass, metal, ceramics, such as suitable mesh: the mesh cloth can be used in about 300 mesh. Ink coverage: with 300 mesh net cloth printing ink can be printed 30 square meters per kilogram. Ink thinner: 783 slow dry water are available, and weight is about 10 - the weight of the ink Printing ink cleaner: 15% with 783 slow dry water cleaning mesh cloth. Drying rate: 150 ℃ Around 180 ℃ drying for 30 minutes. Method of use: 1) When using DBL series inks, should pay attention to maintain the purity of the metal surface; 2) According to need to add the proper amount of thinner ( Oil and water) 3) Multi-color overprint, hard to form dry or dry and then on to the next color printing 4) Screen stuck can use thinner or cleanser, shall screen to start printing after solvent evaporation; 5) DBL series ink must not be mixed with other ink.