Inspection method of body lotion cosmetic glass bottle in cosmetic packaging material factory

Botou City Cosmetic Packaging Material Factory Glass Products Co., Ltd. specializes in the production of body lotion cosmetic glass bottles. The production workshop site of body lotion cosmetic glass bottles requires strict self-inspection, mutual inspection and inspection in accordance with specifications, dimensions and appearance quality. , And random inspection to ensure that the product meets the standard requirements. The inspection methods are as follows. The inspection method uses a high-precision stress tester for stress detection, and uses a vernier caliper with a precision of .mm for specifications and dimensions. The height of the bottle mouth is measured with a rear edge instrument with a precision of .mm, the vertical axis deviation is measured with a vertical tester with a precision of .mm, the thickness of the bottle wall is measured with a wall thickness tester with a precision of .mm, and the thickness of the bottom of the bottle is measured with precision It is tested by a .mm bottle bottom thickness gauge, and the chemical stability is tested with a high-pressure steam sterilizer. 、According to the system's selection and classification standards, pallet detection, weighing and weighing detection are used for material selection and classification, and they are divided into thin tubes, middle tubes, and thick tubes. , The quality inspection department conducts in-plant inspection of the products, and the quality assurance department is responsible for product quality and pre-factory inspections to ensure that the quality of the produced body lotion cosmetic glass bottles meet the standards before they leave the factory.