Español 
Latest products
Injection molding machine, extrusion machine and molding machine 09 market situation
by：Lisson
2020-11-18
Plastic machinery market concern in February 2009 in good condition, the specific products that attracts the most attention is the mould by 37%, 15% followed by injection molding machine, extruder, 12% 3% screw, 3% drier, crusher 3%, feeding machine, molding machine, cosmetics packaging production machine, 2% auxiliary machine, rolling machine, etc.
The injection molding machine, extruder/extrusion production line and machines in three categories of products accounted for 44%, is still the most closely watched.
plastic machinery is the important pillar of the plastics industry development, which provides advanced technology and equipment for the plastics industry, its development is the foundation for the development of the plastics industry, are also affected by plastic industrial development. Around the world, varieties of plastics machinery is mainly composed of injection molding machine, extruder/extrusion production line and machine of three categories of products, they are more than 80% of the total output value of the plastic machinery, including injection molding machine and more than half of the sum of these three kinds of mechanical.
injection molding machine with --
due to injection molding machine before a few years development too fast, now in addition to the mainframe, general specifications of the injection molding machine has an oversupply, but some of the injection molding machine with high content of science and technology, market demand is gradually strengthened. Basically has the following several kinds of models:
it is all electric, hydraulic precision injection molding machine. This kind of product main market is electronic communications, audio and video, home appliances, automobile, etc. , processing conditions the demand is higher, it also improved precision requirements of the injection molding machine, these industries are sunrise industry, has great development space.
the other is the hollow plastic injection machine. This is because the plastic parts under vibration condition of stress damage problems are car all plastic and some other big problems in engineering application, and combined with a variety of rubber and plastic materials with the use of hollow { HotTag} Injection molding technology, which can effectively improve the above defects.
the third is with auxiliary air, water, auxiliary device of new type of injection molding machine. This kind of new type of injection molding machine has a very large market, especially for cosmetic requirements higher, longer service life of products, such as household appliances, automobiles, building more attractive.
extruder affordable
extruder market due to the expanding of application market and technological breakthroughs, still can maintain a small change in the momentum on the whole, but domestic extruder market prices have been hard to avoid, churning out and price war has affected the whole image of the molding machine and domestic market competitiveness, also hindered the development of plastic processing industry. The last two years, only German Klaus & # 8226; Murphy that a company will provide China with more than one hundred production line, plastic doors and Windows and tubing processing industry to have actual strength most for imported equipment, it is the failure of the domestic manufacturer.
extrusion machine and production line in the future market will be developed to the direction of high technical content, the price is lower. Domestic host now basically with conical twin-screw extruder and single screw extruder, the technology is mature, the market sales is the largest, but this kind of product has an oversupply of general specifications, can only maintain the market peak of 50% ~ 60%. The host in the future will focus on developing parallel to the twin screw extruder, is suitable for large amount of extrusion forming extrusion. Direction parallel twin-screw extruder, seventh generation confidential to the sixth generation of high speed, with large length to diameter ratio. The development direction of single screw extruder is large diameter, large length to diameter ratio and exhaust flow. In fact, single screw extruder is a kind of low energy consumption, low cost, as long as the technology properly, it can basically achieve the efficiency of the twin screw extruder, plastic extrusion machine, such as the United States now use mostly single screw, due to the high technical content, replaced the twin screw extruder. Forged
molding machine of plastic equipment prices low ( Injection of about a third to a half of) , low energy consumption, Injection molding, the pressure inside the mold cavity is 15 ~ 140 mpa, swelling pressure and plastic parison generally less than 1 mpa) , strong adaptability, Forming complicated structure, double-wall parts) , it made up for the inadequacy of injection molding processing way, forming industrial parts with high integrity, good comprehensive performance, high added value, low cost. Therefore, although the plastic machinery in the three machines in the proportion of the lowest, but the future will be maintained a strong momentum of development, is the fastest-growing, and most development potential of the model.
plastic auxiliary highlighting
mixer, crusher, feeder, heater and other auxiliary equipment is an important link of plastic production line, a direct impact on the production quality and production efficiency, the current domestic manufacturers, but the basic specification in the same range, also difficult to compete with JinKouJi technology, and most of the imports of plastic production line is equipped with the auxiliary in the introduction and part and reduce sales, so domestic auxiliary market competition is intense. Market capacity and the number does not match, it is bound to cause this situation. The recent development direction of the products is for superfine grinding, Preparation for nanometer materials industry) , vacuum filter, large low noise, high speed grinding, and other functions.
long-term planning in our country plastic industry, plastic products from 2000 to 2005 the average annual growth of about 10%, 2006 ~ 2015, the average annual growth rate will reach 8%, plastic products output reached 25 million tons in 2005, plastic products production doubled in 2015, is expected to reach 50 million tons.
plastic processing industry good development prospects will continue to be the driving force of China's plastics machinery manufacture industry development, is expected in 2001 ~ 2010, the demand for plastic machinery in China the average annual growth of around 6%, is expected to $2010 in 14. 5 billion. That is to say, has a great potential for the development of plastic machinery in China, power is enough, especially in some high technology content, good performance, the price is relatively modest models, such as super large, precision, special injection molding machine, low temperature, high power type of single screw extruder, heat-resistance and used in the production of high permeability of packaging materials and other multi-layer co-extrusion molding machine, production of industrial parts - Auto parts, etc. ) Plastic machinery, etc. , have good prospects for development.
plastic machinery is the important pillar of the plastics industry development, which provides advanced technology and equipment for the plastics industry, its development is the foundation for the development of the plastics industry, are also affected by plastic industrial development. Around the world, varieties of plastics machinery is mainly composed of injection molding machine, extruder/extrusion production line and machine of three categories of products, they are more than 80% of the total output value of the plastic machinery, including injection molding machine and more than half of the sum of these three kinds of mechanical.
injection molding machine with --
due to injection molding machine before a few years development too fast, now in addition to the mainframe, general specifications of the injection molding machine has an oversupply, but some of the injection molding machine with high content of science and technology, market demand is gradually strengthened. Basically has the following several kinds of models:
it is all electric, hydraulic precision injection molding machine. This kind of product main market is electronic communications, audio and video, home appliances, automobile, etc. , processing conditions the demand is higher, it also improved precision requirements of the injection molding machine, these industries are sunrise industry, has great development space.
the other is the hollow plastic injection machine. This is because the plastic parts under vibration condition of stress damage problems are car all plastic and some other big problems in engineering application, and combined with a variety of rubber and plastic materials with the use of hollow { HotTag} Injection molding technology, which can effectively improve the above defects.
the third is with auxiliary air, water, auxiliary device of new type of injection molding machine. This kind of new type of injection molding machine has a very large market, especially for cosmetic requirements higher, longer service life of products, such as household appliances, automobiles, building more attractive.
extruder affordable
extruder market due to the expanding of application market and technological breakthroughs, still can maintain a small change in the momentum on the whole, but domestic extruder market prices have been hard to avoid, churning out and price war has affected the whole image of the molding machine and domestic market competitiveness, also hindered the development of plastic processing industry. The last two years, only German Klaus & # 8226; Murphy that a company will provide China with more than one hundred production line, plastic doors and Windows and tubing processing industry to have actual strength most for imported equipment, it is the failure of the domestic manufacturer.
extrusion machine and production line in the future market will be developed to the direction of high technical content, the price is lower. Domestic host now basically with conical twin-screw extruder and single screw extruder, the technology is mature, the market sales is the largest, but this kind of product has an oversupply of general specifications, can only maintain the market peak of 50% ~ 60%. The host in the future will focus on developing parallel to the twin screw extruder, is suitable for large amount of extrusion forming extrusion. Direction parallel twin-screw extruder, seventh generation confidential to the sixth generation of high speed, with large length to diameter ratio. The development direction of single screw extruder is large diameter, large length to diameter ratio and exhaust flow. In fact, single screw extruder is a kind of low energy consumption, low cost, as long as the technology properly, it can basically achieve the efficiency of the twin screw extruder, plastic extrusion machine, such as the United States now use mostly single screw, due to the high technical content, replaced the twin screw extruder. Forged
molding machine of plastic equipment prices low ( Injection of about a third to a half of) , low energy consumption, Injection molding, the pressure inside the mold cavity is 15 ~ 140 mpa, swelling pressure and plastic parison generally less than 1 mpa) , strong adaptability, Forming complicated structure, double-wall parts) , it made up for the inadequacy of injection molding processing way, forming industrial parts with high integrity, good comprehensive performance, high added value, low cost. Therefore, although the plastic machinery in the three machines in the proportion of the lowest, but the future will be maintained a strong momentum of development, is the fastest-growing, and most development potential of the model.
plastic auxiliary highlighting
mixer, crusher, feeder, heater and other auxiliary equipment is an important link of plastic production line, a direct impact on the production quality and production efficiency, the current domestic manufacturers, but the basic specification in the same range, also difficult to compete with JinKouJi technology, and most of the imports of plastic production line is equipped with the auxiliary in the introduction and part and reduce sales, so domestic auxiliary market competition is intense. Market capacity and the number does not match, it is bound to cause this situation. The recent development direction of the products is for superfine grinding, Preparation for nanometer materials industry) , vacuum filter, large low noise, high speed grinding, and other functions.
long-term planning in our country plastic industry, plastic products from 2000 to 2005 the average annual growth of about 10%, 2006 ~ 2015, the average annual growth rate will reach 8%, plastic products output reached 25 million tons in 2005, plastic products production doubled in 2015, is expected to reach 50 million tons.
plastic processing industry good development prospects will continue to be the driving force of China's plastics machinery manufacture industry development, is expected in 2001 ~ 2010, the demand for plastic machinery in China the average annual growth of around 6%, is expected to $2010 in 14. 5 billion. That is to say, has a great potential for the development of plastic machinery in China, power is enough, especially in some high technology content, good performance, the price is relatively modest models, such as super large, precision, special injection molding machine, low temperature, high power type of single screw extruder, heat-resistance and used in the production of high permeability of packaging materials and other multi-layer co-extrusion molding machine, production of industrial parts - Auto parts, etc. ) Plastic machinery, etc. , have good prospects for development.
Custom message
