Español 
Latest products
Injection cosmetics cosmetics packaging hose production mold of routine maintenance
by：Lisson
2020-11-20
Before using the check
1. Injection cosmetics cosmetics packaging hose production mold before use, to check the control process document, the use of cosmetics cosmetics packaging hose production mold whether the specification, type and unified process document.
2。 Check whether the use of equipment and injection cosmetics cosmetics packaging hose production mold, cosmetics soft packaging hose production molds are in good condition.
3。 The operator should learn more about the use of cosmetics cosmetics packaging hose production mold performance, structure, function principle, and be familiar with the operation method is used. In the process of using the
1. Operating the site must be clean, tools to tidy up, cosmetics cosmetics packaging hose production mold should be no foreign body, roads should be unobstructed.
2。 Injection molding cosmetics cosmetics packaging hose production mould in use process, should follow operation procedures, to prevent the place, throw, tamper with.
3。 For injection molding cosmetics cosmetics packaging hose production mold head a few products, according to drawings carefully check, qualified rear can officially production.
4。 In the work, must check cosmetics cosmetics packaging hose production mold work, found abnormal phenomenon to be maintained at any time.
5。 Always focus on injection lubrication situation of cosmetics cosmetics packaging hose production mold, timing of cosmetic soft movement cosmetics packaging hose production mold parts for lubrication.
check after use the
1. After use, according to the operation procedures to cosmetics cosmetics packaging hose production mold from injection molding machine, it is strictly prohibited to dismantle, indiscriminate discharge, in order to avoid damage to the cosmetic soft hose cosmetics packaging production mold.
2。 Cosmetics cosmetics packaging hose production mould lifting should be reliable, light, slow play, after removal of cosmetics cosmetics packaging hose production molds, to wipe clean, and the anticorrosive oil.
3。 Check injection cosmetics cosmetics packaging hose production mold after use, technical conditions, restore to the normal working state, complete into the designated place to store again.
1. Injection cosmetics cosmetics packaging hose production mold before use, to check the control process document, the use of cosmetics cosmetics packaging hose production mold whether the specification, type and unified process document.
2。 Check whether the use of equipment and injection cosmetics cosmetics packaging hose production mold, cosmetics soft packaging hose production molds are in good condition.
3。 The operator should learn more about the use of cosmetics cosmetics packaging hose production mold performance, structure, function principle, and be familiar with the operation method is used. In the process of using the
1. Operating the site must be clean, tools to tidy up, cosmetics cosmetics packaging hose production mold should be no foreign body, roads should be unobstructed.
2。 Injection molding cosmetics cosmetics packaging hose production mould in use process, should follow operation procedures, to prevent the place, throw, tamper with.
3。 For injection molding cosmetics cosmetics packaging hose production mold head a few products, according to drawings carefully check, qualified rear can officially production.
4。 In the work, must check cosmetics cosmetics packaging hose production mold work, found abnormal phenomenon to be maintained at any time.
5。 Always focus on injection lubrication situation of cosmetics cosmetics packaging hose production mold, timing of cosmetic soft movement cosmetics packaging hose production mold parts for lubrication.
check after use the
1. After use, according to the operation procedures to cosmetics cosmetics packaging hose production mold from injection molding machine, it is strictly prohibited to dismantle, indiscriminate discharge, in order to avoid damage to the cosmetic soft hose cosmetics packaging production mold.
2。 Cosmetics cosmetics packaging hose production mould lifting should be reliable, light, slow play, after removal of cosmetics cosmetics packaging hose production molds, to wipe clean, and the anticorrosive oil.
3。 Check injection cosmetics cosmetics packaging hose production mold after use, technical conditions, restore to the normal working state, complete into the designated place to store again.
Custom message
