Home  >  NEWS  >  How to design economic plastic wholesale cosmetic tubes

How to design economic plastic wholesale cosmetic tubes


The goal of designing inexpensive plastic wholesale cosmetic tubes is to create a product that meets all your requirements and constraints. You need to work out what you want to achieve, then work out how best to achieve it by considering the relative importance of each requirement and constraint. The following steps provide an example of this process:

Identify the requirements and constraints of the product:

The first step of designing economic plastic custom cosmetic tubes is to identify the requirements and constraints of the product.

The key factors that influence the design are:

●What are the key factors that influence the manufacturing process?

●What are the key factors that influence costs?

Minimum set of alternative designs that meet your needs:

The second step is to work out a minimum set of alternative designs that meet your needs. This can be done by considering the constraints and requirements of the product, manufacturing process, market and environment.

The design process for wholesale cosmetic tubes involves choosing from a range of options based on what will work best for your product. In this case, you need to consider whether there are any special features that need to be incorporated into your container such as handles or lids (e.g., lids which fit over tube ends). If so then try drawing up some sketches which show these features as well as how they would look when finished. Remember they will still require careful checking before being sent off!

The design itself:

The third step is the design itself. This is where you'll decide on your custom cosmetic tube's shape and size, as well as its color and material. You'll also need to consider how it will be manufactured (for example, by injection molding or machining) and whether or not it needs any special features like safety caps, child-resistant closures or anti-microbial properties that prevent bacteria growth in the tube itself.

This part of the process can be quite complex if you're trying to make a complicated object like an eye shadow palette or shave brush holder, but don't let this scare you away! Just follow these simple guidelines:

●firstly figure out what kind of product needs making (say: cosmetic tubes),

●secondly find out what kind of materials work best for that particular application,

●Thirdly, create sketches based on these ideas until they're perfect before moving onto prototyping stage four where things get really fun!

Or you can let plastic squeeze tube manufacturers take care of it all.

Carry out detailed technical calculations on your chosen alternative:

The fourth step is to carry out detailed technical calculations on your chosen alternative.

●You will need to calculate the tube diameter, wall thickness, length and volume.

●You will also need to calculate the wall thickness and length of the cap.

●Finally you must calculate the volume of your cap as this is likely to differ from other tubes in use today due to changes in manufacturing techniques over time

Design for manufacturing (DFM) - i.e., for mass production:

The final step is to design for manufacturing (DFM). This means that you'll need to think about how the product will be made, which can include things like assembly, ease of use and maintenance. We'll discuss each in more detail below:

●Assembly - Is your tube easy enough to assemble? It's not just about having a simple design—you also want it to be easy enough that someone can put it together without needing instructions or help from someone else. If it's too difficult or fiddly, consumers may give up on using your cosmetic container altogether!

●Safety - You should always test how safe your design is before sending it off into production by putting it through rigorous testing procedures such as drop tests and impact simulations (and don't forget about toxicity!) so that no one gets hurt when using your new product line at home or in public places like airports where anyone could come across them accidentally while traveling abroad with their own luggage containing several bottles filled with different liquids inside them.

Designing economic plastic wholesale cosmetic tubes is all about compromising between conflicting requirements and practical limitations such as manufacturing flexibility, time and cost constraints

The first step in designing an economic plastic cosmetic tube is determining the type of plastic material that you want to use. There are a variety of different plastics available for this purpose including polypropylene, polyethylene and polystyrene. The choice depends largely on what your product needs to withstand during its life cycle but also on whether it's intended to be used with lab equipment or not; if so then there might be concerns about contamination from chemicals used during processing or cleaning procedures which could affect performance over time (for example if these chemicals leach into water).

Chat Online
Chat Online
Leave Your Message inputting...
Dear friend, thank you for your message. Could you please offer us your email? We will answer your questions as soon as possible. Thank you! ^_^