Español 
Latest products
Glass cleaning process and the key link
by：Lisson
2020-11-11
Health products as one of high-end health care products on the market use glass bottles, continuously by the high transparent, innovative, quality, produced by imported material with high borosilicate and do the most high-end quality.
But in pollution for a long time, it would need to soak after 12 hours, 9 test bottle, 4 internal washing, 2 external washing and so on a series of procedures.
in view of the pollution of glass bottles, details about health care products of cleaning the glass bottle link here:
1, the glass bottle to determine pollution, foreign bodies, dirty bottles early work.
2, glass bottle soak, second foreign body, dirty pick.
3, bottles after pouring water into the box at workshop, has staff of foreign body, dirty bottles carefully pick.
4, a workshop check dirty bottles, glass bottles of the box after test again.
5, bottles into the bottle washing machine, each one bottle soak in 65 & deg; Caustic soda, sterilization, respectively, at the same time after four times of brush wash, the basic nothing in the bottle after bottle.
6, the brush clean glass bottle after a brush, brush bottom link into the spray zone.
7, in the spray zone, the glass bottle upside down after three consecutive way of high pressure water spray, basic cleaning up the bottle of residual alkaline, particle, then after a 2 way of high pressure water spray, make sure that the glass bottles clean no foreign body, finally after 2 times of disinfectant spray, the session lasted for about 5 minutes.
8, wash the glass bottle filling conveyor belt through the sealing area, in the bottle conveyor belt on both sides have a full-time inspection staff in picking glass bottles, ensure clean and intact glass bottles into the filling machine.
in accordance with the relevant provisions requiring companies to produce glass bottle, must be completely conform to the company and the national standard, in order to ensure consumer health care products of guangdong qualified glass bottles.
in view of the pollution of glass bottles, details about health care products of cleaning the glass bottle link here:
1, the glass bottle to determine pollution, foreign bodies, dirty bottles early work.
2, glass bottle soak, second foreign body, dirty pick.
3, bottles after pouring water into the box at workshop, has staff of foreign body, dirty bottles carefully pick.
4, a workshop check dirty bottles, glass bottles of the box after test again.
5, bottles into the bottle washing machine, each one bottle soak in 65 & deg; Caustic soda, sterilization, respectively, at the same time after four times of brush wash, the basic nothing in the bottle after bottle.
6, the brush clean glass bottle after a brush, brush bottom link into the spray zone.
7, in the spray zone, the glass bottle upside down after three consecutive way of high pressure water spray, basic cleaning up the bottle of residual alkaline, particle, then after a 2 way of high pressure water spray, make sure that the glass bottles clean no foreign body, finally after 2 times of disinfectant spray, the session lasted for about 5 minutes.
8, wash the glass bottle filling conveyor belt through the sealing area, in the bottle conveyor belt on both sides have a full-time inspection staff in picking glass bottles, ensure clean and intact glass bottles into the filling machine.
in accordance with the relevant provisions requiring companies to produce glass bottle, must be completely conform to the company and the national standard, in order to ensure consumer health care products of guangdong qualified glass bottles.
Custom message
