Español 
Latest products
【 Gel cosmetics packaging hose 】 Introduction: injection cosmetics cosmetics packaging hose production mold side phenomenon of leakage is what reason be
by：Lisson
2020-11-20
As a professional plastic products (
Cosmetics packaging hose, lipstick packaging mainly gel hose, vermicelli cosmetics packaging hose, etc. )
Production enterprise, we also often injection cosmetics cosmetics packaging hose production mold side of the leakage phenomenon.
Today, the gel suye cosmetics packaging hose technology consultant to give you look at the injection cosmetics cosmetics packaging hose production mold side the cause of the phenomenon of leakage of material, specific content is as follows:
injection cosmetics cosmetics packaging hose production mold' Gel cosmetics packaging hose soft hose cosmetics packaging production mold 】
injection cosmetics cosmetics packaging hose production mold side the cause of the phenomenon of leaking material
1) injection cosmetics cosmetics packaging hose production mold connected to the fixed bolt tensile strength is not enough, it under the condition of high temperature deformation, cause the molten material from cosmetic soft hose cosmetics packaging production combination of end face extrusion mould parts.
2. Cosmetics cosmetics packaging hose production mold parts assembly is unreasonable, in combination with surface can't rely on strict.
3. Cosmetics cosmetics packaging hose production mold parts end manufacturing precision is poor, the combination of rough surface.
4. Joint bolt uneven.
5. Cosmetics cosmetics packaging hose production mold cavity material flow resistance or die lip ( Die) Jam, resulting in molten material out from the side.
6 cosmetics cosmetics packaging hose production mold temperature to the thermostat, the connecting bolts should be tightened once; Such as the bolt is no longer, can make the cosmetic soft bond strength is insufficient, cosmetics packaging hose production mold parts from the parts surface melting extrusion.
to summarize, the problem of different situation need your specific issue concrete analysis, here is only a gel cosmetics packaging hose manufacturer, hope to have some reference to friends.
injection cosmetics cosmetics packaging hose production mold' Gel cosmetics packaging hose soft hose cosmetics packaging production mold 】
injection cosmetics cosmetics packaging hose production mold side the cause of the phenomenon of leaking material
1) injection cosmetics cosmetics packaging hose production mold connected to the fixed bolt tensile strength is not enough, it under the condition of high temperature deformation, cause the molten material from cosmetic soft hose cosmetics packaging production combination of end face extrusion mould parts.
2. Cosmetics cosmetics packaging hose production mold parts assembly is unreasonable, in combination with surface can't rely on strict.
3. Cosmetics cosmetics packaging hose production mold parts end manufacturing precision is poor, the combination of rough surface.
4. Joint bolt uneven.
5. Cosmetics cosmetics packaging hose production mold cavity material flow resistance or die lip ( Die) Jam, resulting in molten material out from the side.
6 cosmetics cosmetics packaging hose production mold temperature to the thermostat, the connecting bolts should be tightened once; Such as the bolt is no longer, can make the cosmetic soft bond strength is insufficient, cosmetics packaging hose production mold parts from the parts surface melting extrusion.
to summarize, the problem of different situation need your specific issue concrete analysis, here is only a gel cosmetics packaging hose manufacturer, hope to have some reference to friends.
Custom message
