Cosmetics hose and cap should be considered in the design of some of the details

Cosmetics hose and cap should be considered in the design of some of the details of plastic hose, hose cosmetics, food hose in the design for cap when there are a lot of special needs, a 1, plastic bottle, glass bottle, cosmetics bottle caps. Cosmetics bottle full, smooth, smooth, uniform thickness of basic, no cold, crack and obvious scar and deformation. 2. Cosmetics bottle straight, smooth, without burr, MAO) , such as thread coordination structure intact, flat. 3. Cosmetics bottle clean both inside and outside. 4. Cosmetics bottle and cap should cooperate closely, no sliding tooth, loose, leakage phenomenon. 1 second, cosmetics bottle caps. In the design requirements ( 1) Full, smooth, no deformation, clean, no dust, oil, etc. ( 2) Cooperate with cosmetics outside the bottle cap is good, don't leak the contents. 2. Cover design requirements ( 1) Rules, smooth, without damage, crack, burr, MAO) And burst phenomenon, uniform color, no color, consistent with standard sample. ( 2) Thread and other supporting structure intact. ( 3) Add anodized or hot stamping should be complete, the color is consistent with the sample. ( 4) Flexible clamshell class outside cover flip. ( 5) Cover design requirements for cosmetics bottle caps and cosmetics bottles cooperate closely, no teeth, pine, the phenomenon such as leakage. 3. Cosmetics packaging - — Hose ( 1) The tube body smooth and neat, uniform thickness, no obvious scratch, color is consistent with the standard sample. ( 2) Seal is strong, no hole, the phenomenon such as wrinkles. ( 3) Caps shall comply with 2. The provisions of the two. 4. Spray cans, 1) Level of tank, no rusty spot, welding seam is smooth, no obvious scratch, main components uniform color, consistent with standard sample. ( 2) Volume mouth is smooth, no cracks, deformation. ( 3) Caps shall comply with 2. 2 requirements.