Cosmetic product packaging appearance requirements

1 Subject content and scope of application This standard specifies the appearance requirements of cosmetic products. This standard applies to all types of cosmetics. 2 Packaging classification according to the types of cosmetic packaging materials: bottles (including plastic bottles, glass bottles); lids [including outer lids and inner lids (plugs, pads)]; bags (including paper bags, plastic bags, and composite bags); soft Tube; box (including cartons, plastic boxes, tin boxes); spray
　　1 Subject content and scope of application This standard specifies the appearance requirements of cosmetic products.

　　 This standard applies to all types of cosmetics.

　　 2 packaging classification according to the types of cosmetic packaging materials: bottles (including plastic bottles, glass bottles);

　　 Cover [including outer cover, inner cover (plug, pad)];

　　 bags (including paper bags, plastic bags, composite bags);

　　 hose;

　　 box (including cartons, plastic boxes, iron boxes);

　　 spray can;

　　 ingot tube (including lipstick tube, foundation tube);

Makeup Pen;

　　Outer box packaging (including flower box, medium box, large box);

　　Others.

　　3 Cosmetic product packaging appearance requirements

　　 All materials of product packaging should be non-toxic and safe.

　　3.1 bottles

　　3.1.1 The bottle body is complete, stable and straight, smooth, basically uniform in thickness, free of cold bursts, cracks, and no obvious scars or deformation.

　　 3.1.2 The bottle mouth is straight and smooth, free of burrs (burrs), and the thread and other matching structures are intact and straight.

　　 3.1.3 Clean inside and outside the bottle.

　　 3.1.4 The bottle and the cap are matched tightly without slippage, loosening, or leakage. Medical, collected and sorted on the education network.

　　3.2 cover

　　3.2.1 inner cover

　　 3.2.1.1 Complete, smooth, no deformation, clean, no dust, oil, etc.

　　 3.2.1.2 It fits well with the bottle and the outer cap, and should not leak.

　　3.2.2 Cover

　　 3.2.2.1 is straight, smooth, free from broken, cracked, burr (burr) and bursting, uniform in color, no color migration, consistent with the quasi-sample.

　　 3.2.2.2 The thread and other matching structures are intact.

　　 3.2.2.3 Anodized aluminum or bronzing should be uniform and complete, and the color should be consistent with the standard sample.

　　3.2.2.4 Clamshell type outer cover can be turned up flexibly.

　　3.2.2.5 The cap and the bottle are tightly matched, and there is no slippage, looseness, leakage, etc.

　　3.3 bags

　　3.3.1 There should be no wrinkles, scratches, air bubbles, and the color is consistent with the standard sample.

　　3.3.2 The sealing should be firm and correct, and there should be no openings, perforations, leakage of paste (liquid), etc.

　　3.3.3 The composite bag is firm and evenly coated.

　　3.4 hose

　　3.4.1 The tube body is smooth, tidy, uniform in thickness, without obvious scratches, and the color is consistent with the standard sample.

　　3.4.2 The seal should be firm, without openings, wrinkles, etc.

　　 3.4.3 The cover should meet

　　 3.2 Requirements.

　　3.5 boxes

　　3.5.1 The surface of the box is smooth and straight, without obvious scratches and burrs (burrs), and the color is uniform, consistent with the standard sample.

　　3.5.2 The opening is tight and suitable, which meets the test requirements of 4.2.

　　3.5.3 The mirror inside the box, the content and the box are firmly bonded, and the mirror image is good. There are no scratches and damages on the bottom.

　　3.6 spray can

　　 3.6.1 The tank body is flat, no rust spots, smooth welds, no obvious scratches on the main parts, and uniform color, which is consistent with the standard sample.