Español 
About cosmetic packing material and hose these
by：Lisson
2020-09-11
The basic knowledge of cosmetic packaging materials and hoses cannot be ignored. The packaging classification can be divided into: A according to the packaging methods and material varieties of cosmetics.
Bottles (including plastic bottles, glass bottles, etc.);
B. Cover [including outer cover, inner cover, (plug, pad, membrane), etc.];
C. Bags (including paper bags, plastic bags and composite bags);
D. Hoses (including plastic hoses, composite hoses, metal hoses, etc.);
E. Boxes (including plastic paper boxes, plastic boxes, metal boxes, etc.);
F. Spray cans (including pressure-resistant aluminum cans, iron cans, etc.);
G. Spindle tube (including lipstick tube, foundation tube, mascara tube, etc.);
H. Drag pen I. Sprinkler head (including pneumatic and pump type);
J. Outer box (including flower box, plastic seal, middle box, transportation packaging, etc.).
The roots of packaging materials in their requirements 1, container and container supporting class 1, the bottle body should be smooth, appearance lubrication, bottle wall thickness and thin roots in even, without significant scars, deformation, should not have cold burst and crack.
Bottle mouth should be regular, lubricated, do not use burr (hair mouth), thread, bayonet coordination structure is intact, rules.
The bottle and cap should be tightly coordinated, no sliding teeth, loose, no leakage phenomenon.
The inside of the bottle should be clean.
2, the hose pipe body should be lubricated, neat, uniform thickness, no significant scratches, color should be uniform together.
Hose seal to be prosperous, rules, should not have openings, wrinkles (mold normal indentation outside).
The composite film of the hose should not float.
3. Cover dividend: PP material, ABS material, Sarin material, PTCG material, K material, electrochemical aluminum, etc., different materials by contact sense, appearance, falling rebound sound and other resume to determine, disinfection method is not the same.
Inner cover: Inner cover shall be intact, lubricated, clean and free from deformation.
The collaboration between the inner lid and bottle and outer lid should be excellent.
The inner cover should not leak.
Outer cover: outer cover shall be regular, lubricated, free from breakage, crack, burr (hair opening).
Outer cover color should be uniform together.
The outer cover thread coordination structure shall be intact.
Add anodized or bronzing cover color should be uniform together.
Flip cover should be sensitive to turn up, the joint part of no cracking.
The cooperation between cap and bottle should be strict, without sliding teeth, loose.
4. The spray tank body is flat, without rust spots, smooth welding seam, no obvious scratches, concave tank phenomenon, color should be uniform together.
The nozzle of the spray can should be smooth and free from wrinkles, cracks and deformations.
The cover of the spray can should meet the requirements of 5.3.2.
5. The nozzles should be clean, clean and free from breakage and cracks.
Sprinkler parts and components should be intact to ensure that the spray dredge.
Second, the root of flexible packaging in their quality requirements.
1. Do not use bags with significant wrinkles, scratches, or air bubbles.
The color of the bag should be even together.
The sealing of the bag should be healthy, there should be no openings, perforations, leakage (paste) phenomenon.
Compound bag should be compound healthy, even coating film.
2, the plastic seal should be bonding, no cracking phenomenon.
Plastic seal appearance should be clean, no damage phenomenon.
There is no wrong loading, leakage loading and flip loading inside the plastic seal.
Three, makeup packaging material roots in their requirements 1, spindle tube pipe tube body should be regular, smooth, no crack, burr (hair mouth), should not have significant scratches, color should be uniform together.
The parts of the spindle tube should be properly tightened to ensure that the contents can be rotated or pushed out normally.
2. The pen holder and cover should be lubricated and regular, and the paint film should not crack.
The collaboration between the holder and the cover of the disguised pen should be loose and appropriate.
The color of the dressing pen should be uniform.
1. The surface of the box should be lubricated and in accordance with the rules. There should be no obvious surface scratches, burrs (haircuts), severe flattening and damage.
Box open tightness should be appropriate, take the flower box, do not forcibly peel with your fingers, to hold the edge of the cover, the bottom does not fall as qualified.
Inside the box, the mirror, contents and boxes should be posted, the mirror image is excellent, no surface scratches and damage.
2, printing and label packaging printing pictures and handwriting should be neat, clear, not easy to fall off, uniform color together.
The labeling of the packaging should not be wrong, omission, upside - down paste, paste should be healthy.
Labels are required to follow the rules of GB 5296.3.
3. Flower box Flower box should be tightly packaged with middle box.
Flower box should be clean, regular, flat, box cover is good, no wrinkles, missing edge, missing Angle phenomenon.
The adhesive part of the flower box should be posted with no signs of Posting, cracking and adhesion.
The product has no wrong loading, leakage loading and flip loading.
4. The middle box should be tightly packaged with the flower box.
The boxes should be clean, clean, neat and with a good lid.
The adhesive part of the box should be posted with no signs of Posting, cracking and adhesion.
The product has no wrong loading, leakage loading and flip loading.
The labeling of medium boxes should be regular, clean and intact, and the product name, standard, number of boxes and the name of the producer should be indicated according to the requirements.
Requirements for trademarks, instructions, box tips and certificates in the package 1) Printed trademarks should have clear drawing rules, clear color sets, clear handwriting and healthy.
2) The trademark shall be pasted well and shall not be tilted, omitted, inverted or mispasted, and shall not be tilted or warped after being pasted.
3) The instructions are printed with neat drawings and clear handwriting.
4) Box head (paste) printing handwriting, clear picture.
5) The certificate shall be printed with clear handwriting and drawings, with symbols such as the name of the factory and the code of the inspector, etc.
6) The applicable standard number shall be indicated on the product or its instruction manual and package.
7) Marking the production date and shelf life, or the batch number and application date of the production period.
8) Transportation and packaging should be orderly, regular, smooth and healthy sealing;
The product has no wrong loading, leakage loading and flip loading.
The problems summarized in the package inspection are mainly in two aspects: 1. Process problem 1. The color printing precision of the inner bag of the mask is not good and the color is not correct 2.
On the hot stamping and frosted glass bottle bottle, hot stamping scratched loose 5, bottle caps, pump head of the pump head and 6 bottles of shoulder gap is too large, printing errors (trademark printing and label printing is wrong, component wrong and so on) 7, set box looks uneven, 8 sets of box deformation, paste the rickety, box surface have glue trace 9, color box printing, bronzing paste gold 10, hose diameter error (requirement 3 mm,
Products is 5 mm) 11, packaging color difference is too big (each batch packaging) 12, magic eye color on the packaging manufacturer change (toothpaste tube end in the middle of tinted point) 13, the hose printing icon deformation 14, 15, form a complete set of packaging bag glue adhesion is not totally 16 dirty, packaging appearance, such as dust, glue, fingerprints, material problem 1 and 2 in card support no 2, glass brightness no 3, hose composite layer no 4, the thickness of the mask inside the bag no 5, inside the bottle cap card buckle too soft, tighten the deformation process of 6, some plastic bottles not high temperature resistant,
The above just listed some common problems, there are many various problems, the customer's demand for packaging material to control, for example: the front of the bottle should not have pitting point, some customers can bear, demand inspectors to master.
Bottles (including plastic bottles, glass bottles, etc.);
B. Cover [including outer cover, inner cover, (plug, pad, membrane), etc.];
C. Bags (including paper bags, plastic bags and composite bags);
D. Hoses (including plastic hoses, composite hoses, metal hoses, etc.);
E. Boxes (including plastic paper boxes, plastic boxes, metal boxes, etc.);
F. Spray cans (including pressure-resistant aluminum cans, iron cans, etc.);
G. Spindle tube (including lipstick tube, foundation tube, mascara tube, etc.);
H. Drag pen I. Sprinkler head (including pneumatic and pump type);
J. Outer box (including flower box, plastic seal, middle box, transportation packaging, etc.).
The roots of packaging materials in their requirements 1, container and container supporting class 1, the bottle body should be smooth, appearance lubrication, bottle wall thickness and thin roots in even, without significant scars, deformation, should not have cold burst and crack.
Bottle mouth should be regular, lubricated, do not use burr (hair mouth), thread, bayonet coordination structure is intact, rules.
The bottle and cap should be tightly coordinated, no sliding teeth, loose, no leakage phenomenon.
The inside of the bottle should be clean.
2, the hose pipe body should be lubricated, neat, uniform thickness, no significant scratches, color should be uniform together.
Hose seal to be prosperous, rules, should not have openings, wrinkles (mold normal indentation outside).
The composite film of the hose should not float.
3. Cover dividend: PP material, ABS material, Sarin material, PTCG material, K material, electrochemical aluminum, etc., different materials by contact sense, appearance, falling rebound sound and other resume to determine, disinfection method is not the same.
Inner cover: Inner cover shall be intact, lubricated, clean and free from deformation.
The collaboration between the inner lid and bottle and outer lid should be excellent.
The inner cover should not leak.
Outer cover: outer cover shall be regular, lubricated, free from breakage, crack, burr (hair opening).
Outer cover color should be uniform together.
The outer cover thread coordination structure shall be intact.
Add anodized or bronzing cover color should be uniform together.
Flip cover should be sensitive to turn up, the joint part of no cracking.
The cooperation between cap and bottle should be strict, without sliding teeth, loose.
4. The spray tank body is flat, without rust spots, smooth welding seam, no obvious scratches, concave tank phenomenon, color should be uniform together.
The nozzle of the spray can should be smooth and free from wrinkles, cracks and deformations.
The cover of the spray can should meet the requirements of 5.3.2.
5. The nozzles should be clean, clean and free from breakage and cracks.
Sprinkler parts and components should be intact to ensure that the spray dredge.
Second, the root of flexible packaging in their quality requirements.
1. Do not use bags with significant wrinkles, scratches, or air bubbles.
The color of the bag should be even together.
The sealing of the bag should be healthy, there should be no openings, perforations, leakage (paste) phenomenon.
Compound bag should be compound healthy, even coating film.
2, the plastic seal should be bonding, no cracking phenomenon.
Plastic seal appearance should be clean, no damage phenomenon.
There is no wrong loading, leakage loading and flip loading inside the plastic seal.
Three, makeup packaging material roots in their requirements 1, spindle tube pipe tube body should be regular, smooth, no crack, burr (hair mouth), should not have significant scratches, color should be uniform together.
The parts of the spindle tube should be properly tightened to ensure that the contents can be rotated or pushed out normally.
2. The pen holder and cover should be lubricated and regular, and the paint film should not crack.
The collaboration between the holder and the cover of the disguised pen should be loose and appropriate.
The color of the dressing pen should be uniform.
1. The surface of the box should be lubricated and in accordance with the rules. There should be no obvious surface scratches, burrs (haircuts), severe flattening and damage.
Box open tightness should be appropriate, take the flower box, do not forcibly peel with your fingers, to hold the edge of the cover, the bottom does not fall as qualified.
Inside the box, the mirror, contents and boxes should be posted, the mirror image is excellent, no surface scratches and damage.
2, printing and label packaging printing pictures and handwriting should be neat, clear, not easy to fall off, uniform color together.
The labeling of the packaging should not be wrong, omission, upside - down paste, paste should be healthy.
Labels are required to follow the rules of GB 5296.3.
3. Flower box Flower box should be tightly packaged with middle box.
Flower box should be clean, regular, flat, box cover is good, no wrinkles, missing edge, missing Angle phenomenon.
The adhesive part of the flower box should be posted with no signs of Posting, cracking and adhesion.
The product has no wrong loading, leakage loading and flip loading.
4. The middle box should be tightly packaged with the flower box.
The boxes should be clean, clean, neat and with a good lid.
The adhesive part of the box should be posted with no signs of Posting, cracking and adhesion.
The product has no wrong loading, leakage loading and flip loading.
The labeling of medium boxes should be regular, clean and intact, and the product name, standard, number of boxes and the name of the producer should be indicated according to the requirements.
Requirements for trademarks, instructions, box tips and certificates in the package 1) Printed trademarks should have clear drawing rules, clear color sets, clear handwriting and healthy.
2) The trademark shall be pasted well and shall not be tilted, omitted, inverted or mispasted, and shall not be tilted or warped after being pasted.
3) The instructions are printed with neat drawings and clear handwriting.
4) Box head (paste) printing handwriting, clear picture.
5) The certificate shall be printed with clear handwriting and drawings, with symbols such as the name of the factory and the code of the inspector, etc.
6) The applicable standard number shall be indicated on the product or its instruction manual and package.
7) Marking the production date and shelf life, or the batch number and application date of the production period.
8) Transportation and packaging should be orderly, regular, smooth and healthy sealing;
The product has no wrong loading, leakage loading and flip loading.
The problems summarized in the package inspection are mainly in two aspects: 1. Process problem 1. The color printing precision of the inner bag of the mask is not good and the color is not correct 2.
On the hot stamping and frosted glass bottle bottle, hot stamping scratched loose 5, bottle caps, pump head of the pump head and 6 bottles of shoulder gap is too large, printing errors (trademark printing and label printing is wrong, component wrong and so on) 7, set box looks uneven, 8 sets of box deformation, paste the rickety, box surface have glue trace 9, color box printing, bronzing paste gold 10, hose diameter error (requirement 3 mm,
Products is 5 mm) 11, packaging color difference is too big (each batch packaging) 12, magic eye color on the packaging manufacturer change (toothpaste tube end in the middle of tinted point) 13, the hose printing icon deformation 14, 15, form a complete set of packaging bag glue adhesion is not totally 16 dirty, packaging appearance, such as dust, glue, fingerprints, material problem 1 and 2 in card support no 2, glass brightness no 3, hose composite layer no 4, the thickness of the mask inside the bag no 5, inside the bottle cap card buckle too soft, tighten the deformation process of 6, some plastic bottles not high temperature resistant,
The above just listed some common problems, there are many various problems, the customer's demand for packaging material to control, for example: the front of the bottle should not have pitting point, some customers can bear, demand inspectors to master.
Custom message
