Wuhai city spray bottle printing process

Wuhai city 2, and the size of the pump head, spray bottle printing process could be set to match the bottle diameter, the spray of the specifications of the 12. 5mm— 24 mm, volume of 0. 1 ml/time - 0. 2 ml/time, commonly used in perfumes, gel water with products such as packaging, the length of the same caliber to take over can be determined according to the height of the bottle. 1, silk screen as packaging products in general graphic identity processing working procedure, has important influence to the product image, so higher requirements on the technical aspects. Ten, carton thickness of the molding can preparation for 1 - 25. 4 mm material, has excellent toughness and high impact strength. The impact strength is 3 - modified polyester 10 times. It has excellent formability, cold bending, not white, no crack, printing and modified easily. Widely used in indoor and outdoor signs, shelves and other vending machine panel, furniture, construction and mechanical damper, etc. B, PS multiple color thickness of 0. 2mm— 0. 8 was blowing process 2. 1 bottle preform molding injection molding in is mainly used to enhance the PET. Usually adopts screw injection machine. Screw is typically require hardening treatment, lest abrasion occurs after use for a long time. The length of the injection machine nozzle holes should be as short as possible, its diameter should be controlled at about 3 mm. 2, mold fee: bottle blowing mold for 1500 yuan, 8000 yuan 4000 yuan, the injection mould for - 20000 yuan, the mold with stainless steel material more expensive than alloy material, but durable, die a few at a time, see the demand of production, such as production is bigger, can choose one out of four or six of the mold, the client may decide.