What is the injection mold design
1. Among tablet products should not be commonly into rubber, in order to prevent the bending deformation.
2。 In general, the STP in RP directly.
3。 When the mold base is bigger, the interval of the STP is 150 - 200mm。
4。 Lock up and down the ejector plate screw spacing is 150 - 200mm。
5。 When have a thimble at the bottom of the slide block, ejector plate up and down to a forced return.
6。 The finished draft Angle to reduce glue as a benchmark.
7。 SP as far as possible to take big the diameter and arrangement in the finished product of orthographic projection area below.
8。 Cooling impinges three principles: fast cooling, die temperature, processing is convenient.
9。 From the center of mold pin should be integer.
10。 For two and a half piece mold, parting between the fixed plate and the motherboard on schedule with institutional control, LP on male template must have a guide bushing, require a LK shutter is generally good.
11。 To deal with the method of the medial barbed pin, inner side sliding block, is commonly used in plate peeling, ejector pin should avoid as far as possible under the slider, so as to avoid collision or interference.
12. General cavities beyond 20 - finished product contour 30 mm, and from the center of mould should be integer, template 20 - from cavities border 30 mm, if you have the slider should consider the template, the return pin and pay special attention to avoid interference.
13。 Support put pads spacing should be equal, make the mold balance.
The rise of the beauty economy has caused cosmetic brands to pay more and more attention to appearance packaging.
●Design team: cosmetics packaging design
●Project background: With the improvement of living standards, cosmetics, a fashionable consumer product, has gradually become the mainstream product in people's lives.
It is the nature of every woman to love beauty.
The cosmetics market has gradually improved in recent years
Now cosmetics are no longer exclusively for women
Cosmetic packaging is also gradually out of a more diversified style
Want to know the latest cosmetic packaging design trends?
You'll understand after reading this article!
The most potential petty bourgeoisie brand-simple style makes me feel relaxed and happy!
Cosmetic packaging is a subdivision field that has grown rapidly in recent yea
Cosmetics are commodities that every woman uses.
Simplified packaging design style is a design direction recognized by young people and modern culture.
Consumer trends are the driving force of packaging innovation, and big data analysis is to combine trend insights with packaging innovation.
In order to attract consumers, in recent years, businesses have put more and more effort on cosmetic packaging, and various novel and exquisite packaging have emerged one after another.
In addition to the production date, manufacturer, etc., what are the secrets of the neglected graphic symbols, words, and numbers on the outer packaging of cosmetics?
In addition to the most common barcodes, there are some unobtrusive small icons on cosmetic packaging that also represent very important information.
This common small open can logo means the shelf life after opening.
Research and Markets released the 2020 Packaging Innovation Trends Report-focusing on the latest trends in packaging innovation and the shift to more sustainable options.
Analysts said: 'Sustainability has become an important factor in today's consumers' purchasing decisions.