To design a hose cosmetics packaging designers need to pay attention to?

To design a hose cosmetics packaging designers need to pay attention to? First, set the color mode. RGB color model and CMYK color mode is adjusting the color in the manuscript before printing design patterns. RGB color model can almost get all the colors of human visual perception, it is mainly used for color display on the screen. Specially used for printing CMYK color mode, the principle is to use white ink absorption and reflection properties. , therefore, is used to print the manuscript should be in CMYK color mode of the output, if the RGB color model, then leads to the color of the print and output there is a big difference between the picture color, so need to overall adjustment will be very trouble, influence the work progress. , of course, is not only in the process of printing color pattern will cause the color difference, there are many other factors can also lead to change color or color deviation, but the designer of the design manuscript in the first step is to make sure the color pattern is printed cmyk mode. Second, the text selection. Small text and line should be designed as a single package, to avoid the multi-color overprint lead to no. The width of the thin line should not be less than zero. 1 mm, otherwise easy to lose or not clear when printed. The net height of not less than 1 English font. The net height of 5 mm, Chinese fonts is not less than 1. 8 mm, for character, especially those less than 5 characters, please try to avoid to use bold or song typeface. Please do not use bold effect in Chinese fonts, otherwise easy to broken in the process of plate or printed pens, lost or paste character strokes, resulting in print scrap. Three, design, color and color contrast between the printing. Cannot be printed on the screen or printer to print color color contrast, this is not the right thing to do. When the design color fill must refer to the percentage of the CMYK color swatches to determine.