The cosmetic packaging material factory talks about the specific instructions for the use of cosmetic glass bottles

The use of oral liquid glass bottles is guaranteed that the disinfection temperature is within the standard range. Before filling, the oral liquid glass bottles should be filled with the corresponding filling, oral liquid bottle filling in the purification workshop, picking cleaning, high temperature, light inspection and labeling And into the pallet box. High temperature sterilization of oral liquid glass bottles to prevent rapid cold and heat, and prevent the oral liquid from falling to the bottom and blasting.

Oral Liquid Glass Bottle

The amount of liquid medicine should be within the allowable range. Over-filling will cause the bottom to fall during high temperature and high pressure disinfection, which will cause the loss of liquid medicine. The liquid medicine in the glass bottle of oral liquid should be filled into the oral liquid bottle. Under the bottleneck. The inspection method for oral liquid glass bottles is to first ensure the quality of the raw materials, and the technical indicators are qualified. The production workshop of the oral liquid glass bottle needs to meet the regulations, and the self-inspection, mutual inspection, patrol and sampling inspection specified in the process are strictly carried out in accordance with the specifications, dimensions, and appearance quality, so as to ensure that the oral liquid glass bottle product meets the standard requirements. The quality inspection department of the oral liquid glass bottle manufacturer conducts in-factory inspection of the product, and the quality assurance department is responsible for the product quality and the inspection of the oral liquid glass bottle before leaving the factory. Oral liquid glass bottle stress detection uses high-precision stress measuring equipment. The size of the oral liquid glass bottle is determined by the accuracy of the accuracy and the accuracy of the bottle mouth inner diameter is determined by the inner diameter feeler gauge. The bottle mouth height is measured by the precision bottle mouth edge back instrument, vertical axis The deviation is detected by a vertical tester with a precision consistent with that of the bottle wall. The thickness of the bottle wall is detected by a wall thickness tester. The thickness of the bottom of the bottle is detected by a precision bottom thickness gauge. The chemical stability is tested by a high-pressure vapor oral liquid bottle. After the oral liquid glass bottles have been fully inspected, random inspections are required, and the products must be inspected at the factory to ensure that the quality of the oral liquid glass bottles meets the specified requirements.