Technical index inspection of injection bottle

During the operation of the manual machine production process, the mouth mold will be misplaced or not in place. The bottle cap includes a connecting part, a sealing part and a channel. The connecting part is airtightly matched with the bottleneck. The sealing part includes a first part and a second part. When the bottle cap is tightly connected with the bottle body, the sealing part seals the suction hole and the air hole. Drinkers don’t need a straw, just loosen the cap a little, which is not true, and the uniformity of the bottle mouth will be very different. However, manual operation will be more flexible than the assembly line due to individual bottle types, so that the assembly line can’t be done. The effect of the product. You can directly suck clothes through the covered channel, which is very smooth and convenient to use. The amount of liquid medicine must be within the allowable range. The shoulder of the bottle body is equipped with air holes, and the inside of the bottle body is equipped with a baffle that divides the bottle body into two or more even-numbered chambers. The baffle is provided with through holes so that the chambers are connected end to end. The passage, the air hole and the suction hole are the ports at both ends of the passage; the overfilling will cause the bottom to fall during high temperature and high pressure sterilization, resulting in loss of liquid medicine.