Some details that should be considered in the design of cosmetic hoses and bottle caps

Some details that should be considered in the design of cosmetic hoses and bottle caps

Plastic hoses, cosmetic hoses, and food hoses have many special requirements for bottle caps when designing. First, plastic bottle and glass bottle cosmetic caps. The cosmetic bottle body is complete, smooth and smooth, and the thickness is basically uniform. No cold burst, cracks, obvious scars and deformation. . Cosmetic bottle mouth is straight, smooth, without burrs (burrs), threads and other coordination structures are intact and straight. . Clean the inside and outside of the cosmetic bottle. .The cosmetic bottle and the cosmetic bottle cap should be closely matched, and there should be no slippage, loosening or leakage. 2. Cosmetic bottle caps. The inner cap design requirements () are complete, smooth, free of deformation, clean, free of dust, oil, etc. () It matches well with the cosmetic bottle cap outside the cosmetic bottle and does not leak the contents. . Outer cover design requirements () regular, smooth, free of damage, cracks, burrs (burrs) and bursting, uniform color, no discoloration, consistent with the standard sample. () The thread and other supporting structures are intact. () Add anodization or bronzing should be uniform and complete, and the color should be consistent with the standard sample. () Clamshell type is flexible on the outside of the cover. () The design of the outer cover requires that the cosmetic bottle cap and the cosmetic bottle cooperate closely, and there is no tooth slippage, looseness, leakage, etc. .Cosmetics packaging-hose () The tube body is smooth, neat, uniform in thickness, without obvious scratches, and the color is consistent with the standard sample. () The seal must be firm, without holes, wrinkles, etc. () The bottle cap should meet the requirements of. .Spray cans () The cans are flat, no rust spots, smooth welds, no obvious scratches on the main parts, uniform color, and consistent with standard samples. () The roll nozzle is smooth, without cracks and deformation. () The bottle cap should meet the requirements of.