Several factors molding injection mold protection system security protection

Injection molding machine mold protection system security protection several elements of injection molding machine mold protection system security protection of several elements

as the most main production injection molding factory tool, it determines the shape of the product, specifications, size and appearance of finish. Hardware mold materials for steel, generally consists of mold before/after the mould.

the mold protection

such as precision mould has a specific vulnerability characteristics of mould is very important for the security and protection, so the general conclusion has the following several aspects:

1, rust, prevent injection molding tools with water/condensate/rain/rust phenomenon caused by fingerprints, etc.

2, anti-collision: prevent mold for thimble has broken, not back in place caused by the mould damaged phenomenon.

3, in addition to sting: prevent mold by wipe cloth wipe rush/material/hand/nozzle clamp/knife touch mould caused by burrs.

4, missing parts: prevent mold die due to lack of rod/washer parts damaged in the process of use.

5, pressure defense: prevent mold due to still remain products and clamping mould crushed.

6, under-voltage: prevent mold due to the low voltage protection stress damage.

there for thimble fracture has not been back in place, mould residues, thimble auxiliary products, the lack of parts is the proportion of the damage of the mould is higher, and that the more frequently, so that more than 85% of the mould are therefore cause damage, and higher maintenance costs generally of mould, so how to avoid the happening of this kind of situation is directly related to the interests of the injection molding industry.

in order to prevent mold damage caused by the production delays, and high maintenance cost, and at the same time in order to save human resources, encyclopeolia after continuous research and improvement of science and technology, using machine vision technology developed a product, referred to as the 'mold protector'.

monitor, tooling or mold protector, also known as the mold electronic eye, can effectively protect the value of expensive mold. Injection molding machine mold protection system, installed in the injection molding machine, can be directly check whether the product is unqualified, and check the presence of residues, prior to closing to prevent mold damage. Injection molding machine is running, each cycle, expensive mold is likely to be for plastic residue or dislocation sliding block are in danger of damage, encyclopeolia to prevent these happen, prevent mold closing and alarm automatically when exception occurs.

if you did not take effective protection of mold, mold damage, we give you the following Suggestions:

mould maintenance notice:

1, removing mould, to avoid bruising and drench water, moving smoothly.

2, spray anti-rust agent, spray a small amount of release agent.

3, to die to conduct a comprehensive inspection and antirust processing, be wiped dry line cavity, core and ejector mechanism and a moisture and debris, and other parts and spraying mould rust inhibitor and butter.

the mold maintenance:

the mold in the process of continuous work, because in the process of the movement to the wear and tear parts, lubricants, water leakage, crushed plastic materials, the need for mold maintenance.

maintenance generally divided into the daily maintenance and lower die die maintenance

mould daily maintenance generally include the following aspects:

1, regular cleaning ( The appearance, PL, cavity, core, etc. ) , regular cleaning parting surface debris;

2, add lubricant to regularly ( Ejection mechanism, line, etc. )

3, change regularly easy wear parts ( Rod, bolts, etc. )

4, need to be aware of other places packing printing knowledge conversion table