【 Lipstick cosmetics packaging hose 】 Why on injection cosmetics cosmetics packaging hose production mold maintenance

Why on injection cosmetics cosmetics packaging hose production mold maintenance? The significance of this problem seems to be no answer, in fact is very important. To do a good job, must first sharpen his device lipstick cosmetics packaging hose manufacturer want to producing the high quality product, must have the high quality cosmetics cosmetics packaging hose production mold. Today, technical adviser for the lipstick of professional cosmetics packing hose says cosmetics cosmetics packaging hose production mold maintenance small common sense, the content is as follows:

on injection cosmetics cosmetics packaging hose production mold maintenance is to ensure that plastic soft hose cosmetics packaging cosmetics production injection mold to work normally, the effective measures for the maintenance of the equipment as long as there is wiped clean, check the calibration, lubricating oil and so on, mainly has the following points.

　　1. Ensure the quality of products

to ensure injection cosmetics cosmetics packaging hose production mold is stable, reliable to produce qualified parts, is to make cosmetics cosmetics packaging hose production mold is in good working condition. Injection cosmetics cosmetics packaging hose production mold at work, always can't have been in the best working state, total want to appear this or that kind of situation, such as guide pin, guide sleeve short of oil caused by blocking action, tighten loose movement deformation caused by these little problems, will bring the quality of the products, and timely maintenance, will overcome these foibles, make cosmetics cosmetics packaging hose production mold is in good working condition.

　　2. Reduce downtime maintenance time

cosmetics cosmetics packaging hose production mould in use process, there are always possible failures and the need to stop, can't continue to work when downtime, therefore, all hope downtime as short as possible, shut-down times less is better. Soft makeup and cosmetics packaging hose production mold failures often not suddenly appeared, it has a process of accumulation, such as sliding parts of oil will lead to wear and tear, such as timely maintenance, timely refueling, will reduce the wear and tear, making cosmetics cosmetics packaging hose down delay arrival of moulds.

　　3. Reduce the operation cost

cosmetics cosmetics packaging hose production mould in use process, to pay a lot of running costs, such as inspection fee, set-up costs, lubricants, repair costs, etc. , the sum of these costs is the running costs. In these costs, is the largest number of repairs. Such as cosmetics cosmetics packaging hose production mold maintenance is bad, often have to pay many additional repairs, make cosmetics cosmetics packaging hose production mold can't work normally, and increases the operation cost.