【 Lipstick cosmetics packaging hose 】 Factory to talk about: how to correctly use injection cosmetics cosmetics packaging hose production mold

Injection cosmetics cosmetics packaging hose production mold is our lipstick cosmetics packaging hose/vermicelli packaging hose manufacturer production without a tool, can say, if not the correct use of cosmetics cosmetics packaging hose production mold, will bring tremendous waste, at the same time seriously affected the production and business operation of the enterprise. Below, the lipstick of suye cosmetics packaging hose technology consultant is to simply talk about injection cosmetics cosmetics packaging hose production mold, the correct way of using specific content is as follows:

how to properly use cosmetics cosmetics packaging hose production mold?

injection cosmetics cosmetics packaging hose production mold is the key of the injection molding equipment, such as the quality of the cosmetics cosmetics packaging hose production mold changes, such as the position of each other, forming the surface become rough, morphological changes, clamping surface contact is lax, etc. , will affect the quality of plastic parts, so the operator must pay attention to cosmetic soft hose cosmetics packaging production mold used correctly.

1, before work should check each part of the cosmetics cosmetics packaging hose production mould if there are impurities, dirt and so on, the cosmetics cosmetics packaging hose production mold of impurity and dirt, etc. , with a clean cotton swab, attached to a prison application copper scraper to remove impurities, so as to avoid damage to cosmetics cosmetics packaging hose production mold surface. Such as' SMC cosmetics cosmetics packaging hose production mold 】

2, injection cosmetics cosmetics packaging hose production mold clamping force can not be too high, generally will be subject to no flash when plastic molding, high clamping force and increased power consumption and easy to make cosmetics cosmetics packaging hose production to speed up the damage of mold and transmission parts, therefore, reasonable choice of zobah mold force is very important.

3, cosmetics cosmetics packaging hose production mold in the process of maintenance and repair, it is forbidden to use metal utensils to hammer cosmetics cosmetics packaging hose production any parts of the mold, prevent cosmetics cosmetics packaging hose production mold caused by excessive impact and deformation, damage, or reduce the quality of plastic parts.

4, cosmetics cosmetics packaging hose production mold has many moving parts, the most important thing for the moving parts and maintenance is to provide good lubrication, to this, in the production or succession, lubricating condition of the sliding parts should pay special attention to, pay attention to keep a good lubrication.

5, cosmetics cosmetics packaging hose production mold temporarily don't need to unload cosmetics cosmetics packaging hose production mold, coated with anti-rust oil, will be packaged and stored in ventilated, dry and not easily affected by the impact of safety, in the soft cosmetics cosmetics packaging hose production mold placed weight is prohibited.

6, such as injection molding machine temporarily need not, on the injection molding machine clamping mechanism of cosmetics cosmetics packaging hose production mold should also apply anti-rust oil, and don't long time between dynamic and fixed mode in the clamping state, prevent certain parts compression deformation.

summary: the above is the lipstick of suye cosmetics packaging hose technology consultant for everybody finishing on the plastic soft hose cosmetics packaging cosmetics production mold, the correct way of using, hope to help friends, if you still need to learn more about the lipstick cosmetics packaging hose, gel cosmetics packaging hose, cosmetics bottles, etc information, please collect on this site. 【 。 】