How to repair molded cosmetic glass bottles

u0026#;Molded cosmetic glass bottle

of

The advantage is not

easily broken

According to the production of cosmetic glass bottle mold types, we have seen some

Same

Shaped cosmetic glass bottle

.

u0026#; Molded

Cosmetic glass bottles are widely used in the market, food industry, and pharmaceutical industry (such as infusion bottles, body lotions, etc.). Liquid bottles, large-capacity bottles of Fengyoujing, safflower oil bottles), cosmetics industry (such as petroleum bottles, cream bottles, cream bottles).

u0026#; Cosmetic glass bottle mold production, the mold and the cosmetic glass bottle have seams and mold lines, the bottom of the crack, the insufficient internal pressure resistance, and the insufficient mold conditions caused by heat shock, so the quality of the mold directly affects the mold For the quality of cosmetic glass bottles, our unit opens molds to ensure the quality of the molds. After the molds are used, we ensure the regular maintenance of the molds. There are no quality problems in the production of cosmetic glass bottles.

u0026#;.

Mold cleaning, starting to clean the mold forming mold, punch and die, it is recommended to use the dry jet cleaning method;

u0026#;. Early

After a comprehensive inspection, the tolerance of the mold and molding begins, the status of the cast iron and the mold, and the relevant data are recorded in the mold maintenance inspection list and the list.

u0026#;.

Basic maintenance and repair of damaged parts. Same position of spray welding seam, spray welding of all joints; joint correction of initial bulkhead molds and parts, turning of mold bonding parts, lettering and knurling OM in Bot Mold, mold parts and mold polishing treatment.

u0026#;.

After the mold and the mold start to be trimmed, use a micrometer and a vernier caliper to measure and inspect.

u0026#; Mold maintenance procedures are slightly different from the preparations for immediate repair or replacement of molds during the production process. Check again before installing the mold machine. Pairs or sets of mold components are very important. In order to ensure the stability of production conditions, all important parameters and initial design specifications.