Glass bottle making replacement product technology bottle blowing, deputy director of the work

Bottle blowing, deputy director of the work. 1 responsible for notifying the monitor of the machine, the specific time of die replacement products and product Numbers. 2 in accordance with the product standards for in product team to provide the necessary measuring equipment. Such as the capacity of the sample bottle, thimble, plug gauge, gauge, etc. , which makes the product technical parameters of control before the machine more consistent, to ensure product quality stability, and yield improvement. 3 will be written in the product standard whiteboard in front of the machine, and indicate the relevant requirements and matters needing attention, so easy to machine operators know the product characteristics, accurate control measures. 4 sampling to the machine before the mold and accessories, found that the problem timely feedback to the relevant department. Such losses can not only avoid the unqualified mould computer inspection repair die, bottle blowing monitor whether acceptance mould work in place. 5 to choose the appropriate die lubricant. Die lubricant according to the characteristics of computer products, possible defects in the process of production, users choose several aspects, such as special requirement. 6 to determine the need to adjust the organization and timing of action. This needs to be carefully controlled in machine products, prepare the technical parameters and specific computer products. July 15 minutes in advance to adjust material temperature. This requires according to computer product structure, the rate of change timely adjust material heating, cooling system, to ensure the material temperature drops of computer products.