Cosmetic plastic hose factory determinant molding machine characteristics

Determinant molding machine characteristics of cosmetic plastic hose factory

the current production of cosmetic plastic hose tank molding machine in the world, the determinant soft pipe ( Also known as 1 s. Soft pipe bender, referred to as 'the ranks of the number of products accounted for about 60% of the production accounts for about 80% of the total cosmetic plastic hose tank above. Determinant of soft pipe is composed of a number of identical units ( Branch) Of each unit is an independent system of complete machine, in recent years, the determinant of manufacturing machine for 6, 8, 10 groups. Determinant system the characteristics of the machine are as follows: (1) machine equipped with feed system, not the other distributor;

2) ranks machine of each unit is completely independent timing control, can start and stop alone, will not affect other units, easy to mould replacement and repair the machine. Due to the need of production, can reduce the number of operation group; (3) ranks machine production range, it can blow method, and molding pressure method available hose cans. With different size and shape of big or small inlet hose has the very good adaptability and flexibility. In product quality and machine speed on all fours, forms is expected to close, each unit can respectively, forming different shapes and sizes of products; (4) ranks machine can make the hose can achieve good cosmetic plastic molding distribution, especially in the production of all kinds of hose pressure method cans, uniform wall thickness, can achieve cosmetic plastic hose can of lightweight. Compared with other molding machine has higher single-mode production efficiency; 5 ranks machine main operator is not rotational, movements smooth, good operation condition. Ranks machine blow method of operation process is as follows:

1) loading;

(2) save gas;

5. Outline of heavy heat and extension;

(3) blow;

6 are blowing and early hose can of cold;

4 prototypes;

7) clamp hoses;

ranks machine pressure blowing method, operation process is as follows,

end hose tank cooling and transport.

1) loading;

(2) to suppress the young type

(3) outline of flip

the later process and blow the same method