Cosmetic container silk screen

A brief description of the cost and process flow of cosmetic container silk screen printing. 1. Silk screen printing is generally used as the graphic identification processing process of packaging products, which has an important influence on the product image, so it has higher technical requirements.

2. Glass container screen printing: For screen printing on blank transparent or frosted or sprayed containers, use high-temperature inks. After coloring, they will be baked at high temperature. They will not fade and are not easy to scratch. The color is relatively heavy, so choose a high-temperature furnace. Most of the manufacturers carry out silk screen printing, and the printing quantity is generally more than 5,000, and the charge is 500 yuan/style/color for less than 5,000, and 0.1 yuan/color for more than 5,000.

3. In the design, no more than 2 colors should be considered. Negative films should be produced when the film is produced. The characters, patterns, and lines should not be too thin or too large, which may cause broken lines or ink accumulation. Proof should be confirmed before mass production. There is a color difference.

　　4. If the frosted glass container is misprinted, it can be printed again after the grinding process. The processing fee is 0.1 yuan-0.2 yuan/piece.

　　5. The round container is printed in the same color as one color, and the flat or oval shape is calculated according to the number of printing surfaces and the number of printing colors on the printing surface.

　　6. ??Plastic containers are divided into common ink and UV ink screen printing. UV ink is widely used. The characters and pictures are three-dimensional, more glossy, not easy to fade, and can be printed with multi-color effects. The print volume is generally more than 1,000.

7. The screen printing of glass containers and plastic containers requires a printing fee. If it is a new specification packaging container and the screen printing factory does not have the corresponding fixture, it will charge a fixture fee, but this fee can be deducted by doing a certain amount of silk screen printing, for example, the business volume is full 2 This fee is waived for more than 10,000 yuan, and each manufacturer has different conditions. Generally, the screen printing fee is 50-100 yuan/piece, and the fixture fee is 50 yuan/piece. The hot stamping edition fee is 200 yuan/piece.

　　 8. Proof before batch screen printing, and produce after confirming the effect of graphic screen printing. After confirmation, the production adjustment cycle is 4-5 days, depending on the screen printing difficulty and quantity.

　　9. Usually the silk screen factory has hot stamping, hot silver and other processing techniques. The screen printing methods include manual, mechanical screen printing, pad printing and sticker pad printing.

　　10. When producing and using silk-screened containers, care should be taken to avoid excessive handling or collisions, to avoid grinding silk-screen effects, and to choose a reasonable disinfection method during production.

　　11. The lowest silk screen cost is 0.06 yuan/color, but special attention should be paid to the failure of the expected design effect due to poor silk screen printing, and the entire batch of containers may be scrapped. The silk screen can be printed according to the percentage of spot color to achieve rich colors.