About cosmetic packaging material requirements of standards and regulations of the state

About cosmetic packaging material requirements of standards and regulations of the state, in fact all cosmetics packaging materials should be non-toxic and safe, we from six aspects below will show. 1. The bottle ( Including the plastic bottle and glass bottle) 1. 1 bottle complete, stable, straight, smooth, basic uniform thickness. Not cold, crack, obvious scar and deformation. 1. 2 bottle should be straight and no burr. Match structure ( For example, thread) Should be in good condition and upright. 1. 3 bottles are clean inside and outside. 1. 4 closely cooperate with bottle and lid, no sliding tooth, loosening and leakage. 2. The bag ( Including paper bags, plastic bags and compound bag) 2. 1 should not have wrinkles, scratches and bubbles, and the color should be consistent with the standard sample. 2. 2 seal should be solid, erect, can not have open hole, perforation, paste ( Liquid) The phenomenon such as leakage. 2. 3 compound bag solid compound, uniform coating. 3. The hose 3. 1 tube body is smooth, neat, uniform thickness, no obvious scratch, and the color is consistent with the standard sample. 3. 2 seal should be strong, can not open or folded. 3. 3 plate should comply with the requirements. 4. Box ( Including paper box, plastic box and tin box) 4. The box surface is smooth and straight, no obvious scratch and burr. Color uniform and consistent with the standard sample. 4. 2 opening suitable and conform to the requirements of the test. 4. 3 the mirror inside the box and the outside firmly and the box together, good image. No scratch or damage. 5. Spray cans of 5. 1 tank flat, no rust, weld seam is smooth, the main parts have no obvious scratch, colour and lustre is uniform, consistent with standard sample. 5. 2 roll should be smooth and no crack and deformation. 5. 3 plate should comply with the requirements. 5. 4 pump spray box should comply with the relevant requirements. 6. Ingot tube 6. 1 at the end of the pipe should be smooth and even. 6. 2 the tube body is suitable for air tightness, paste should be spin out or normal.