【 Lipstick cosmetics packaging hose 】 Factory to talk about: injection cosmetics cosmetics packaging hose production mold use matters needing attention

As often used in injection molding cosmetics cosmetics packaging hose production mold manufacturing enterprises, our cosmetics cosmetics packaging hose production for plastic injection mold has a strict cosmetics packaging soft management, the use of work must first sharpen his doing, we understand the importance of the tools. Today, the [suye Lipstick cosmetics packaging hose 】 Technical adviser said for injection cosmetics cosmetics packaging hose production mold use the matters needing attention, specific content is as follows:

injection cosmetics cosmetics packaging hose production mold using note

1, molding cosmetics cosmetics packaging hose production mold of the parts before assembly to remove burrs, dirt, clean before assembly.

2, all the parts to should take put down gently, are not allowed to directly with hammer knock each parts in assembly process.

3, plastic cosmetic soft hose cosmetics packaging production mold assembly sequence: first of all installation and barrel flange connection, and then the cosmetics cosmetics packaging hose production mold concrete, again is shunt type cone, die mandrel body parts, the last is to mold opening, sizing and gland, etc.

4, connecting bolts, adjusting screw before installation should be painted a layer of silicone oil, remove in high temperature environment will be more easily. When fastening bolt, should be put diagonally two bolts and tighten, prevent caused by uneven when two connection parts can't live on yan close contact.

5, uneven thickness of products, adjust the gap between the mold and core rod, should pay attention to loosen the screw of the thin side, then tighten the thicker side screw, to avoid damage to parts or wring screws.

6, the production process clean mold discharging mouth, scraper should use copper piece or a bamboo knife, clean, do not use hard steel knife clean, prevent the scratch parts.

6, if the soft plastic cosmetics cosmetics packaging hose production mold not to use, after the parts to oil together, in and out of the mouth sealed, stored in a dry ventilated the gallows, cosmetics cosmetics packaging hose production mold is not allowed to put heavy things.

7, clearing up after a nap injection cosmetics cosmetics packaging hose production mold discharging mouth, forbid to use file file cosmetics cosmetics packaging hose production mold mouth or remove metal edges and burrs, can only use fine abrasive or fine emery cloth poured the discharging mouth edges, burrs, smooth finish. 【 SMC cosmetics cosmetics packaging hose production mold 】

summary: the above notice is suye [at seven o 'clock Lipstick cosmetics packaging hose 】 Summarize the technical adviser for the friends about the injection cosmetics use soft hose cosmetics packaging production mold the note 'all of the content, hope to help friends. If you want to learn more about the lipstick cosmetics packaging hose, gel cosmetics packaging hose, cosmetics bottles, etc information collection on this site, please. 【 。 】